Phase formation and electrical characterization of lead-free (1-x)Ba(Zr<inf>0.05</inf>Ti<inf>0.95</inf>)O<inf>3</inf>–xBa(Fe<inf>0.5</inf>Ta<inf>0.5</inf>)O<inf>3</inf>binary solid solution
Copyright © 2017 American Scientific Publishers All rights reserved. The properties of the solid solution (1 − x)BZT05–xBFT were investigated. All samples showed a pure perovskite phase indicating a high solubility limit of BFT in BZT. For x ≥ 01, the samples exhibited strong dielectric-frequency di...
Saved in:
| Main Authors: | , |
|---|---|
| Format: | Journal |
| Published: |
2018
|
| Subjects: | |
| Online Access: | https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85027404113&origin=inward http://cmuir.cmu.ac.th/jspui/handle/6653943832/56944 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Chiang Mai University |
| Summary: | Copyright © 2017 American Scientific Publishers All rights reserved. The properties of the solid solution (1 − x)BZT05–xBFT were investigated. All samples showed a pure perovskite phase indicating a high solubility limit of BFT in BZT. For x ≥ 01, the samples exhibited strong dielectric-frequency dispersion. Increasing BFT enhanced the dielectric constant and the degree of dielectric-frequency dispersion. Very high dielectric constants (>35,000 at 1 kHz) were observed for the x ≥ 05 samples at temperatures >150 C. An obvious change in dielectric behavior was found for the modified sample (x ≥ 0.1). By using the complex impedance spectroscopy, the dielectric behaviour could be explaned in terms of Maxwell–Wagner polarization due to the heterogeneous conduction of the modified samples. The ferroelectric properties of the x >0.1 samples also presented a large change as compared to the unmodified sample due to these samples had higher leakage current. |
|---|