Relationships between processing parameters and properties of PZT ceramics

In present work, lead zirconate titanate (PZT) ceramics, having the composition near morphotropic phase boundary were prepared by conventional mixed oxide method. The sintering process was performed at various sintering temperatures ranging from 1100 to 1300 °C. Relationships between phase and sinte...

全面介紹

Saved in:
書目詳細資料
Main Authors: C. Puchmark, G. Rujijanagul
格式: Book Series
出版: 2018
主題:
在線閱讀:https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=62949218637&origin=inward
http://cmuir.cmu.ac.th/jspui/handle/6653943832/60381
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
實物特徵
總結:In present work, lead zirconate titanate (PZT) ceramics, having the composition near morphotropic phase boundary were prepared by conventional mixed oxide method. The sintering process was performed at various sintering temperatures ranging from 1100 to 1300 °C. Relationships between phase and sintering temperature, and phase and structure were reported. An increase sintering temperature affected the increase in grain size. The grain growth rate was found to have a linear fit with the phenomenological kinetic grain growth equation. Tetragonal relative fraction increased with increasing sintering temperature. In addition, dielectric constant at dielectric peak increased with increasing grain size which consistent with the trend of tetragonality. © 2008 Trans Tech Publications, Switzerland.