Quantitative Phase Analysis and Crystal Structure of DyBCO Ceramics Prepared at Diferent Sintering Conditions
The DyBCO ceramics were fabricated by solid-state reaction method under a normal air atmosphere using a stoichiometric amount (i.e. Dy:Ba:Cu = 1:2:3) of high-purity Dy2O3, BaCO3 and CuO starting powders, which were previously mixed and calcined at 900oC for 4 h. The green DyBCO pellets were sintered...
Saved in:
| Main Authors: | , , , |
|---|---|
| Format: | บทความวารสาร |
| Language: | English |
| Published: |
Science Faculty of Chiang Mai University
2019
|
| Online Access: | http://it.science.cmu.ac.th/ejournal/dl.php?journal_id=9322 http://cmuir.cmu.ac.th/jspui/handle/6653943832/64160 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Chiang Mai University |
| Language: | English |
| Summary: | The DyBCO ceramics were fabricated by solid-state reaction method under a normal air atmosphere using a stoichiometric amount (i.e. Dy:Ba:Cu = 1:2:3) of high-purity Dy2O3, BaCO3 and CuO starting powders, which were previously mixed and calcined at 900oC for 4 h. The green DyBCO pellets were sintered at various sintering temperatures (i.e. 850, 900, 930, 950 and 980oC) for 2 h. The influence of sintering process on phase formation of ceramics was observed by X-ray diffraction (XRD). The quantitative phase analysis of ceramics was analyzed by fitting the XRD pattern using the PowderCell program. The results showed that the DyBa2Cu3O7-δ composition was identified as the main crystalline phase. At higher temperatures (> 950oC), the Dy2BaCuO5 (Dy-211) secondary phase was observed. The relative fraction of various phases was discussed in relation to phase formation and density change. The SEM-EDS/WDS images of ceramics exhibited irregular shaped grains. The average grain size increased from ~2.3 to ~7.0 µm when the sintering temperature was increased. The possibility of stoichiometric change in DyBCO ceramic due to different processing conditions was also discussed in details. |
|---|