Study of mechanical properties of magnesium oxide doped alumina (Al 2O 3) and yttria stabilized zirconia (YSZ) composite for medical applications

• Main Authors: Phothawan A., Nganvongpanit K., Tunkasiri T., Eitssayeam S.
• Format: Conference or Workshop Item
• Language: English
• Published: 2014
• Online Access: http://www.scopus.com/inward/record.url?eid=2-s2.0-84860808477&partnerID=40&md5=53a09241473f000307bcd3a50749a0c8; http://cmuir.cmu.ac.th/handle/6653943832/6686
• Institution: Chiang Mai University

The aim of this research is to study the mechanical properties such as hardness, wear resistance etc, of the magnesium oxide (MgO) doped alumina (Al 2O 3) and yttria stabilized zirconia (YSZ) composite, We first prepared MgO-doped Al 2O 3 (denoted as Al 4) by mixing Al 2O 3 powder and 0.4 wt% of MgO powder. After that Al 4 powder was mixed YSZ powder, with the formula [(x)Al 4 - (100-x)YSZ] when x was varied from 0 - 100 by wt%. The samples were sintered at 1450, 1500, 1550, 1600 and 1650 °C. In addition, microstructure of the surface was studied employing both optical and scanning electron microscopes. The hardness of the surface was investigated by Vickers indentation technique and pin on disk apparatus was employed for wear rate measurement. The results showed that the density and volume shrinkage decreased with the increase of Al 4 content. The grain size and porosity of the specimens tend to decrease when the sintering temperature increases. The hardness and wear resistance of the samples increased with the increase of Al 4 up to 90 %. It was also found that the material is not toxic to the body. © (2012) Trans Tech Publications.