Post-treatment by sodium silicate after zinc phosphating on cold-rolled steel

• Main Authors: Dech-Oup S., Thaiwatthana D., Chairaungsri T.
• Format: Article
• Language: English
• Published: 2014
• Online Access: http://www.scopus.com/inward/record.url?eid=2-s2.0-84856583132&partnerID=40&md5=ec809827a73109a82aeb81a7339aecc6; http://cmuir.cmu.ac.th/handle/6653943832/6889
• Institution: Chiang Mai University

Post-treatment by sodium silicate after zinc phosphating on cold-rolled steel was studied. The steel substrates were firstly phosphated in a zinc-phosphating bath containing ZnO, NaF, H 3PO 4 and Ni(NO 3) 2 6H 2O under controlled conditions. Post-treatment by sodium silicate was consequently performed by varying the sodium silicate concentration and immersing time in the range of 33.3-100 wt% and 1-10 minutes, respectively. The coating layers before and after post-treatment were characterised by X-ray diffractometry and scanning electron microscopy-energy dispersive X-ray microanalysis. The phosphated layer was formed to be mainly hopeite and a minority of phosphophyllite, whereas the coating after post-treatment is mainly amorphous sodium silicate. The optimum post-treatment condition was using the 33.3 wt% sodium silicate solution at 5 minutes immersing time, by which an increase in corrosion resistance can be adequately obtained after post-treatment.