การปรับปรุงประสิทธิภาพการผลิตของบริษัท ทีพีพี ฟู้ดส์ จำกัด โดยใช้เทคนิคลีน
The objective of this independent study is to study and improve the efficiency of the dehydrated fruit production of TPP Foods company limited. At the present, the company is unable to catch up with customer demand. Which is considered as common major problem in industrial production due to ineff...
Saved in:
Main Author: | |
---|---|
Other Authors: | |
Format: | Independent Study |
Language: | other |
Published: |
เชียงใหม่ : บัณฑิตวิทยาลัย มหาวิทยาลัยเชียงใหม่
2020
|
Online Access: | http://cmuir.cmu.ac.th/jspui/handle/6653943832/69557 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Chiang Mai University |
Language: | other |
Summary: | The objective of this independent study is to study and improve the efficiency of the
dehydrated fruit production of TPP Foods company limited. At the present, the company is unable
to catch up with customer demand. Which is considered as common major problem in industrial
production due to inefficient production process. This also results in low production line efficiency
in the case study factory. Therefore, it is necessary to understand the problems and causes of
inefficiency process.
This study is to improve the dried fruit production efficiency process using lean
manufacturing technique. The flow diagram of the process chart and value stream mapping was
collected and displayed from the actual production line. the value added activity necessary nonvalue
added activity and non-value added activities processes were analyzed. The improved of
waste in production processes were suggested Why-Why analysis techniques, 5W-1H and ECRS
principles. Then, the production process is continually improved base on the propose method. When
comparing the performance before and after the improvement from the study,
The result of study showed dried fruit production process can be reduced from 21 to 17
steps accounted for 19.05 %. The processing time can be reduced from 934.30 minutes per batch to
429.01 minutes per batch (54.08 % improvement). Moreover, the distance of production process can
be reduced from 32.80 meters to 13.80 meters (57.93% improvement). As a result, the efficiency of
the production base on %VA can be increased from 48.18% to 72.91% (51.33% improvement). |
---|