Phase formation, microstructure and electrical properties of mica glass-ceramics containing Cr2O3 produced by heat treatment

• Main Authors: Niyompan A., Phumas S., Tipakontitikul R., Tunkasiri T.
• Format: Conference or Workshop Item
• Language: English
• Published: 2014
• Online Access: http://www.scopus.com/inward/record.url?eid=2-s2.0-84875715411&partnerID=40&md5=6d9bad654e78f769c03c8a3e457dd06d; http://cmuir.cmu.ac.th/handle/6653943832/6987
• Institution: Chiang Mai University

The mica glass-ceramics containing Cr2O3 were produced via heat treatment process from the bulk parent glass specimens. The appropriate treatment temperatures were selected according to the information provided by the DTA measurement. XRD analysis demonstrated that co-existence of the mica and MgAl2Si3O10 phases were found at the lower treatment temperature while pure mica phase could be formed at a higher temperature. The SEM investigations revealed the effect of Cr 2O3 addition on mica crystals development. The electrical resistivity of the glass-ceramic samples showed some significant relation with the added ions. With small amount of addition, an increase of the electrical resistivity was observed. The present glass-ceramics could be a promising candidate as advanced insulating materials, as evidenced from the presence of crystalline phases with machinable properties and good mechanical strength coupled with its high resistivity. © 2012 Elsevier Ltd and Techna Group S.r.l.