Dry Sliding Wear Behavior of Sintered SS316L-Sn Containing MoS2 Solid Lubricant

The Chiang Mai Journal of Science is an international English language peer-reviewed journal which is published in open access electronic format 6 times a year in January, March, May, July, September and November by the Faculty of Science, Chiang Mai University. Manuscripts in most areas of science...

Full description

Saved in:
Bibliographic Details
Main Authors: Wantana Koetniyom, Yossawas Nopjinda, Romechalee Tepnok, Nattaya Tosangthum, Monnapas Morakotjinda, Thanyaporn Yotkaew, Pongsak Wila, Ruangdaj Tongsri
Language:English
Published: Faculty of Science, Chiang Mai University 2020
Subjects:
Online Access:https://epg.science.cmu.ac.th/ejournal/dl.php?journal_id=11110
http://cmuir.cmu.ac.th/jspui/handle/6653943832/69895
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Chiang Mai University
Language: English
id th-cmuir.6653943832-69895
record_format dspace
spelling th-cmuir.6653943832-698952020-10-08T08:36:16Z Dry Sliding Wear Behavior of Sintered SS316L-Sn Containing MoS2 Solid Lubricant Wantana Koetniyom Yossawas Nopjinda Romechalee Tepnok Nattaya Tosangthum Monnapas Morakotjinda Thanyaporn Yotkaew Pongsak Wila Ruangdaj Tongsri powder metallurgy solid lubricants molybdenum disulfide friction coefficient The Chiang Mai Journal of Science is an international English language peer-reviewed journal which is published in open access electronic format 6 times a year in January, March, May, July, September and November by the Faculty of Science, Chiang Mai University. Manuscripts in most areas of science are welcomed except in areas such as agriculture, engineering and medical science which are outside the scope of the Journal. Currently, we focus on manuscripts in biology, chemistry, physics, materials science and environmental science. Papers in mathematics statistics and computer science are also included but should be of an applied nature rather than purely theoretical. Manuscripts describing experiments on humans or animals are required to provide proof that all experiments have been carried out according to the ethical regulations of the respective institutional and/or governmental authorities and this should be clearly stated in the manuscript itself. The Editor reserves the right to reject manuscripts that fail to do so. Traditional powder metallurgical process is commonly used for producing self-lubricating composites. Solid lubricant dispersion in the steel matrices affects tribological properties by lowering friction coefficient leading to lifetime extension of steel matrix composite parts. Molybdenum disulfide (MoS2) is one of the most used solid lubricants since its lamellar crystalline structure can form a sliding film adhering to the rubbing surfaces. The sliding film acts as anti-friction or anti-wear layer. Due to such action, MoS2 is widely used for providing friction reduction in a situation where the use of liquid lubricants is impractical. However, MoS2 decomposes and reacts with the matrix at high temperatures, usually employed for producing sintered self-lubricating composites. The reaction leads to undesirable products when the powder metallurgical route is used to incorporate MoS2 into steel matrices. In order to lessen undesirable reaction, the temperature-activated phenomenon, resulting in decrease of lubricating efficiency, it is necessary to find the method for mitigating decomposition and reaction. In this work, tin (Sn) powder was added to the mixtures of 316L stainless steel and MoS2 powders with expectation that sintering enhancement by Sn powder addition would reduce sintering temperatures and thus reduce MoS2 + 316L reaction. Varied MoS2 contents (5, 10 and 15 wt. %) were mixed with fixed 4 wt. % Sn and balance 316L stainless steel powder. The green compacts of powder mixtures were sintered at temperatures of 1,150 C and 1,200 C in hydrogen atmosphere for 45 min. Mechanical properties and dry-sliding wear behavior of the sintered composites were investigated. Liquid phase sintering due to Sn powder addition was observed. However, the energy dispersive spectroscopy (element mapping mode) showed that the reaction between MoS2 and alloying elements in 316L powder occurred and resulted in sulfide formation. It was found that the amount of added MoS2 had influences on the tensile properties, hardness and sintered density. Although wear resistance and friction coefficient slightly increased according to the MoS2 content, the added MoS2 amounts higher than 10 wt.% led to adverse effect. 2020-10-08T08:36:16Z 2020-10-08T08:36:16Z 2020 Chiang Mai Journal of Science 47,4 (Special Issue II : July 2020), p.838-853 2465-3845 https://epg.science.cmu.ac.th/ejournal/dl.php?journal_id=11110 http://cmuir.cmu.ac.th/jspui/handle/6653943832/69895 Eng Faculty of Science, Chiang Mai University
institution Chiang Mai University
building Chiang Mai University Library
continent Asia
country Thailand
Thailand
content_provider Chiang Mai University Library
collection CMU Intellectual Repository
language English
topic powder metallurgy
solid lubricants
molybdenum disulfide
friction coefficient
spellingShingle powder metallurgy
solid lubricants
molybdenum disulfide
friction coefficient
Wantana Koetniyom
Yossawas Nopjinda
Romechalee Tepnok
Nattaya Tosangthum
Monnapas Morakotjinda
Thanyaporn Yotkaew
Pongsak Wila
Ruangdaj Tongsri
Dry Sliding Wear Behavior of Sintered SS316L-Sn Containing MoS2 Solid Lubricant
description The Chiang Mai Journal of Science is an international English language peer-reviewed journal which is published in open access electronic format 6 times a year in January, March, May, July, September and November by the Faculty of Science, Chiang Mai University. Manuscripts in most areas of science are welcomed except in areas such as agriculture, engineering and medical science which are outside the scope of the Journal. Currently, we focus on manuscripts in biology, chemistry, physics, materials science and environmental science. Papers in mathematics statistics and computer science are also included but should be of an applied nature rather than purely theoretical. Manuscripts describing experiments on humans or animals are required to provide proof that all experiments have been carried out according to the ethical regulations of the respective institutional and/or governmental authorities and this should be clearly stated in the manuscript itself. The Editor reserves the right to reject manuscripts that fail to do so.
author Wantana Koetniyom
Yossawas Nopjinda
Romechalee Tepnok
Nattaya Tosangthum
Monnapas Morakotjinda
Thanyaporn Yotkaew
Pongsak Wila
Ruangdaj Tongsri
author_facet Wantana Koetniyom
Yossawas Nopjinda
Romechalee Tepnok
Nattaya Tosangthum
Monnapas Morakotjinda
Thanyaporn Yotkaew
Pongsak Wila
Ruangdaj Tongsri
author_sort Wantana Koetniyom
title Dry Sliding Wear Behavior of Sintered SS316L-Sn Containing MoS2 Solid Lubricant
title_short Dry Sliding Wear Behavior of Sintered SS316L-Sn Containing MoS2 Solid Lubricant
title_full Dry Sliding Wear Behavior of Sintered SS316L-Sn Containing MoS2 Solid Lubricant
title_fullStr Dry Sliding Wear Behavior of Sintered SS316L-Sn Containing MoS2 Solid Lubricant
title_full_unstemmed Dry Sliding Wear Behavior of Sintered SS316L-Sn Containing MoS2 Solid Lubricant
title_sort dry sliding wear behavior of sintered ss316l-sn containing mos2 solid lubricant
publisher Faculty of Science, Chiang Mai University
publishDate 2020
url https://epg.science.cmu.ac.th/ejournal/dl.php?journal_id=11110
http://cmuir.cmu.ac.th/jspui/handle/6653943832/69895
_version_ 1681752803422240768