Polycyclic aromatic hydrocarbon removal from petroleum sludge cake using thermal treatment with additives

• Main Authors: Pakpahan E.N., Isa M.H., Kutty S.R.M., Chantara S., Wiriya W.
• Format: Article
• Language: English
• Published: 2014
• Online Access: http://www.scopus.com/inward/record.url?eid=2-s2.0-84873579360&partnerID=40&md5=a941e21ee0f6c7a1dfb4e0e28c759692; http://cmuir.cmu.ac.th/handle/6653943832/7011
• Institution: Chiang Mai University

Petroleum sludge is a hazardous waste that contains various organic compounds including polycyclic aromatic hydrocarbons (PAHs) which have carcinogenic-mutagenic and toxic characteristics. This study focuses on the thermal treatment (indirect heating) of petroleum sludge cake for PAH degradation at 250, 450, and 650 °C using Ca(OH)2+NaHCO 3 as an additive. The treatment was conducted in a rotary drum electric heater. All experiments were carried out in triplicate. Concentrations of the 16 priority PAHs in gas (absorbed on Amberlite XAD-4 adsorbent), particulate (on quartz filter) and residue phases were determined using gas chromatography-mass spectrometry (GC-MS). The samples were extracted with acetonitrile by ultra-sonication prior to GC-MS analysis. The use of additive was beneficial and a temperature of 450 °C was suitable for PAH degradation. Low levels of PAH emissions, particularly carcinogenic PAH and toxic equivalent concentration (ΣTEC), were observed in gas, particulate and residue phases after treatment. © 2013 Copyright Taylor and Francis GRouép, LLC.