Simulation And Experimentation Of Water Hydraulics Technology For Automatic Traditional Cookies Production

by Yusof, Ahmad Anas, Misha, Suhaimi, Md Isa, Mohamed Hafiz, Wasbari, Faizil, Ibrahim, Mohd Qadafie, Kasim, Mohd Shahir
Published 2018

Multi-response optimization of process parameter in fused deposition modelling by response surface methodology

by Kasim, Mohd Shahir, Harun, Nurul Hatiqah, Mohd Shahim, Mohammad Shah All Hafiz, W. Mohamad, W Noor Fatihah
Published 2019

Design and optimization of runner and gating systems for permanent mould casting

by Roni Sahroni, Taufik, Kamaruddin, Mohammad Aizrulshah, Kasim, Mohd Shahir, Md Ali, Mohd Amran, Mohamad, Effendi, Ito, Teruaki
Published 2014

Prediction of Cutting Force in End Milling of Inconel 718

by Kasim, Mohd Shahir, Sulaiman, Mohd Amri, Md. Ali, Mohd Amran, Abdul Aziz, Mohd Sanusi, Mohamad, Noraiham, Raja, Izamshah
Published 2013

A Study On Surface Roughness During Fused Deposition Modelling: A Review

by Harun, Nurul Hatiqah, Kasim, Mohd Shahir, Zainal Abidin, Muhammad Zaimi, Raja Abdullah, Raja Izamshah, Attan, Hassan, Ganesan, Hema Nanthini
Published 2018

Effects of Machine Parameters on Surface Roughness Using Response Surface Method in Drilling Process

by Mohd , amran, Salmah, Siti, Hussein, Nur Izan Syahriah, Raja, Izamshah, Mohd , Hadzley, Sivarao, Subramonian, Kasim, Mohd Shahir, Sulaiman, Mohd Amri
Published 2013

Helical Micro-Hole Drilling Of Chemically Strengthened Glass Using Capsule-Shaped Electroplated Diamond Tool

by Mizobuchi, Akira, Abdul Aziz, Mohd Sanusi, Kasim, Mohd Shahir, Mohamad, Effendi, Salleh, Mohd Rizal, Raja Abdullah, Raja Izamshah, Ishida, Tohru
Published 2019

Tool Life Of TiAlN PVD Coated Carbide Tool In High-Speed End Milling Of Untreated Inconel 718 Under Minimum Quantity Lubrication Condition

by Kasim, Mohd Shahir, Che Haron, Che Hassan, A Ghani, Jaharah, Gusri, Akhyar Ibrahim, Mohd Zaid, Abdul Yazid, Sulaiman, Mohd Amri
Published 2013

Design And Development Of Weaving Aid Tool For Rattan Handicraft

by Abdullah, Zulkeflee, Janin @ Abd. Karim, Nurul Fadzlina, Md Ali, Mohd Amran, Shamsudin, Shamsul Anuar, Kasim, Mohd Shahir, Samat, Khairul Fadzli
Published 2015

Effect Of Parameter Condition On Surface Roughness For Machining AISI D2 Hardened Tool Steel

by Raja Abdullah, Raja Izamshah, J.P.T. , Mo, S., Ding, A Rahman, Muhamad Arfauz, Mohd Abid, Mohd Asyadi Azam, Kasim, Mohd Shahir
Published 2014

Morphological Characteristics And Wear Mechanism Of Recycled Carbon Fibre Prepreg Reinforced Polypropylene Composites

by Mohamad, Noraiham, Abd Latiff, Anisah, Liew, Pay Jun, Kasim, Mohd Shahir, Abd Razak, Jeefferie, Ab Maulod, Hairul Effendy, Qumrul Ahsan
Published 2021

Investigation on Improvement of Surface Roughness Using Rotary Ultrasonic Assisted Machining Technique for Hardened Steel Material / Azlan Ramli...[et al.]

by Ramli, Azlan, Raja Abdullah, Raja Izamshah, Abu Bakar, Mohd Hadzley, Kasim, Mohd Shahir, A. Rahman, Muhamad Arfauz, Mohd Zakaria, Muhammad Akmal
Published 2017

The Effects Of Indentation Loading Force And Number Of Indentations On The Micro Hardness Variation For Inconel 718

by W. Mohamad, W Noor Fatihah, Kasim, Mohd Shahir, Mohd Zakaria, Muhammad Akmal, Mohd Shahrim, Mohammad Shah All Hafiz, Mohamed, Saiful Bahri
Published 2019

Electrochemical Performance Of Molybdenum Disulfide Supercapacitor Electrode In Potassium Hydroxide And Sodium Sulfate Electrolytes

by Mohd Abid, Mohd Asyadi 'Azam, Raja Seman, Raja Noor Amalina, Abdul Aziz, Mohd Fareezuan, Raja Abdullah, Raja Izamshah, Kasim, Mohd Shahir
Published 2020

Optimizing The Processing Conditions Of Sodium Potassium Niobate Thin Films Prepared By Sol-Gel Spin Coating Technique

by Mat Harttar, Maziati Akmal, Abd Rashid, Mohd Warikh, Azlan, Umar Al-Amani, Azmi, Nurul Azuwa, Salleh, Mohd Shukor, Kasim, Mohd Shahir
Published 2017

Multi-Objective Optimization Using Box-Behnken Of Response Surface Methodology For High-Speed Machining Of Inconel 718

by Kasim, Mohd Shahir, Che Haron, Che Hassan, A Ghani, Jaharah, Mohamad, Effendi, Raja Abdullah, Raja Izamshah, Md Ali, Mohd Amran, Saedon, Juri
Published 2014

Multi-Objective Optimization Using Box-Behken Of Response Surface Methodology For High-Speed Machining Of Inconel 718

by Kasim, Mohd Shahir, Che Haron, Che Hassan, A Ghani, Jaharah, Mohamad, Effendi, Raja Abdullah, Raja Izamshah, Md Ali, Mohd Amran, Saedon, Juri
Published 2014

Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls

by Raja Abdullah, Raja Izamshah, Hassan, Zulhairy, Kasim, Mohd Shahir, Abu Bakar, Mohd Hadzley, Md Ali, Mohd Amran, Sulaiman, Mohd Amri, Subramonian, Sivarao
Published 2014

Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic

by Raja Abdullah, Raja Izamshah, Mohd Nawawi, Nurul Husna, Abu Bakar, Mohd Hadzley, Md Ali, Mohd Amran, Kasim, Mohd Shahir, Sulaiman, Mohd Amri
Published 2014

An Assessment For A New Approach To Pulsating Lubrication Strategy (PLS) In End Milling

by Kasim, Mohd Shahir, Mohd Shahrim, Mohammad Shah All Hafiz, Raja Abdullah, Raja Izamshah, W. Mohamad, W Noor Fatihah, Abdullah, Abu, Jaafar, Mohd Fairuz
Published 2019