Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions

by A. Raof, Natasha, A. Ghani, Jaharah, Che Haron, Che Hassan
Published 2019

Potential of bio-metal cutting fluid from treated recycled cooking oil for metal cutting fluid application / Ahsana Aqilah Ahmad, Jaharah A. Ghani and Che Hassan Che Haron

by Ahmad, Ahsana Aqilah, A. Ghani, Jaharah, Che Haron, Che Hassan
Published 2022

The influence of cutting parameter under sustainable machining approaches on surface roughness of AISI 4340 / Ahsana Aqilah Ahmad, Jaharah A. Ghani and Che Hassan Che Haron

by Ahmad, Ahsana Aqilah, A. Ghani, Jaharah, Che Haron, Che Hassan
Published 2023

Study on wear mechanism of solid carbide cutting tool in milling CFRP

by Muhamad Khairussaleh, Nor Khairusshima, Che Haron, Che Hassan, A. Ghani, Jaharah
Published 2016

Comparison effect of delamination factor (Fd) on unidirectional and woven kenaf fibre reinforced plastic composite materials during milling process [Pembandingan kesan faktor pelek...

by Azmi, H., Che Haron, Che Hassan, A. Ghani, Jaharah, Mokhtar, Suhaily
Published 2018

Evaluation of thrust force in drilling of woven kenaf fiber reinforced epoxy composite laminates

by Mokhtar, Suhaily, Che Haron, Che Hassan, A. Ghani, Jaharah, Harun, Azmi
Published 2017

Study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology

by Harun, Azmi, Che Haron, Che Hassan, A.Ghani, Jaharah, Mokhtar, Suhaily
Published 2016

Evaluation of Thrust Force in Drilling of Woven Kenaf Fiber Reinforced Epoxy Composite Laminates / Suhaily Mokhtar...[et al.]

by Mokhtar, Suhaily, Che Haron, Che Hassan, A. Ghani, Jaharah, Harun, Azmi
Published 2017

TRIZ approach for machining process innovation in cryogenic environment

by A. Ghani, Jaharah, A. Raof, Natasha, Che Haron, Che Hassan, Junaidi, Syarif
Published 2016

The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel

by A. Raof, Natasha, A. Ghani, Jaharah, Che Haron, Che Hassan, Syarif, Junaidi
Published 2018

The effect of cryogenic application on surface integrity in manufacturing process: A review

by A. Raof, Natasha, A. Ghani, Jaharah, Che Haron, Che Hassan, Syarif, Junaidi
Published 2012

Evaluation of Hole Performance and Force Magnitude on Drilling Parameter for Orthopaedic Surgical Bone Drilling / Noorazizi Mohamad Samsuddin ...[et al.]

by Mohamad Samsuddin, Noorazizi, Izamshah, Raja, Kasim, Mohd Shahir, Che Haron, Che Hassan
Published 2017

A biomechanical analysis of lifting technique: a comparative study of back lift and leg lift in the manufacturing industry

by Hartomo, Hartomo, Hassan, Azmi, Che Haron, Che Hassan, Md Deros, Baba, Iqbal, Mohammad
Published 2003

Effect Of Cutting Speed On The Carbide Cutting Tool In Milling Inconel 718 Alloy

by Abdul Hadi, Musfirah, A Ghani, Jaharah, Che Haron, Che Hassan, Kasim, Mohd Shahir
Published 2016

Machinability study on milling kenaf fiber reinforced plastic composite materials using the design of experiments

by Harun, Azmi, Che Haron, Che Hassan, A. Ghani, Jaharah, Mokhtar, Suhaily, Abdul Rahim, Yuzairi
Published 2018

Chip formation and coefficient of friction in turning S45C medium carbon steel

by A. Raof, Natasha, Othman, Hazreen, A. Ghani, Jaharah, Che Haron, Che Hassan, Junaidi, Syarif
Published 2014

Prediction of cutting force for milling of inconel 718 under cryogenic condition by response surface methodology / Nurul Hayati Abdul Halim...[et al.]

by Abdul Halim, Nurul Hayati, Che Haron, Che Hassan, Abdul Ghani, Jaharah, Azhar, Muammar Faiq
Published 2019

TRIZ approach for designing a new assisted tooling for dimple structure fabrication / Mohd Nor Azam Mohd Dali...[et al.]

by Mohd Dali, Mohd Nor Azam, A. Ghani, Jaharah, Che Haron, Che Hassan, Rizal, Muhammad
Published 2017

A Study on Parameter Optimization of the Delamination Factor (Fd) in Milling Kenaf Fiber Reinforced Plastics Composite Materials Using DOE Method / Azmi Harun...[et al.]

by Harun, Azmi, Sia, Ting Ting, Che Haron, Che Hassan, A. Ghani, Jaharah, Mokhtar, Suhaily
Published 2017

Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel

by A. Raof, Natasha, A. Ghani, Jaharah, Syarif, J., Che Haron, Che Hassan, Abdul Hadi, Musfirah
Published 2014