Machining-induced grain refinement of AISI 4340 alloy steel under dry and cryogenic conditions

by A. Raof, Natasha, A. Ghani, Jaharah, Che Haron, Che Hassan
Published 2019

Potential of bio-metal cutting fluid from treated recycled cooking oil for metal cutting fluid application / Ahsana Aqilah Ahmad, Jaharah A. Ghani and Che Hassan Che Haron

by Ahmad, Ahsana Aqilah, A. Ghani, Jaharah, Che Haron, Che Hassan
Published 2022

The influence of cutting parameter under sustainable machining approaches on surface roughness of AISI 4340 / Ahsana Aqilah Ahmad, Jaharah A. Ghani and Che Hassan Che Haron

by Ahmad, Ahsana Aqilah, A. Ghani, Jaharah, Che Haron, Che Hassan
Published 2023

Study on wear mechanism of solid carbide cutting tool in milling CFRP

by Muhamad Khairussaleh, Nor Khairusshima, Che Haron, Che Hassan, A. Ghani, Jaharah
Published 2016

Comparison effect of delamination factor (Fd) on unidirectional and woven kenaf fibre reinforced plastic composite materials during milling process [Pembandingan kesan faktor pelek...

by Azmi, H., Che Haron, Che Hassan, A. Ghani, Jaharah, Mokhtar, Suhaily
Published 2018

Evaluation of thrust force in drilling of woven kenaf fiber reinforced epoxy composite laminates

by Mokhtar, Suhaily, Che Haron, Che Hassan, A. Ghani, Jaharah, Harun, Azmi
Published 2017

Study on machinability effect of surface roughness in milling kenaf fiber reinforced plastic composite (unidirectional) using response surface methodology

by Harun, Azmi, Che Haron, Che Hassan, A.Ghani, Jaharah, Mokhtar, Suhaily
Published 2016

Evaluation of Thrust Force in Drilling of Woven Kenaf Fiber Reinforced Epoxy Composite Laminates / Suhaily Mokhtar...[et al.]

by Mokhtar, Suhaily, Che Haron, Che Hassan, A. Ghani, Jaharah, Harun, Azmi
Published 2017

Research and modelling of surface roughness, cutting forces and I-kaz coefficients for S42C in turning using response surface methodology

by Samin, Razali, Nuawi, Mohd Zaki, A. Ghani, Jaharah, Mohamed. Haris, Sallehuddin
Published 2019

TRIZ approach for machining process innovation in cryogenic environment

by A. Ghani, Jaharah, A. Raof, Natasha, Che Haron, Che Hassan, Junaidi, Syarif
Published 2016

The influence of machining condition and cutting tool wear on surface roughness of AISI 4340 steel

by A. Raof, Natasha, A. Ghani, Jaharah, Che Haron, Che Hassan, Syarif, Junaidi
Published 2018

The effect of cryogenic application on surface integrity in manufacturing process: A review

by A. Raof, Natasha, A. Ghani, Jaharah, Che Haron, Che Hassan, Syarif, Junaidi
Published 2012

Effect Of Cutting Speed On The Carbide Cutting Tool In Milling Inconel 718 Alloy

by Abdul Hadi, Musfirah, A Ghani, Jaharah, Che Haron, Che Hassan, Kasim, Mohd Shahir
Published 2016

Machinability study on milling kenaf fiber reinforced plastic composite materials using the design of experiments

by Harun, Azmi, Che Haron, Che Hassan, A. Ghani, Jaharah, Mokhtar, Suhaily, Abdul Rahim, Yuzairi
Published 2018

Chip formation and coefficient of friction in turning S45C medium carbon steel

by A. Raof, Natasha, Othman, Hazreen, A. Ghani, Jaharah, Che Haron, Che Hassan, Junaidi, Syarif
Published 2014

TRIZ approach for designing a new assisted tooling for dimple structure fabrication / Mohd Nor Azam Mohd Dali...[et al.]

by Mohd Dali, Mohd Nor Azam, A. Ghani, Jaharah, Che Haron, Che Hassan, Rizal, Muhammad
Published 2017

Development of Dynamic Assisted Tooling Using TRIZ Approach for Dimple Structure Fabrication in Milling Process / Sharudin Hassan...[et al.]

by Hassan, Sharudin, A. Ghani, Jaharah, Che Haron, Che Hasan, Md Dali, Mohd Nor Azam
Published 2017

A Study on Parameter Optimization of the Delamination Factor (Fd) in Milling Kenaf Fiber Reinforced Plastics Composite Materials Using DOE Method / Azmi Harun...[et al.]

by Harun, Azmi, Sia, Ting Ting, Che Haron, Che Hassan, A. Ghani, Jaharah, Mokhtar, Suhaily
Published 2017

Research of chatter suppression in turning operation with process damping using stability lobe diagram

by Samin, Razali, Nuawi, Mohd Zaki, Azmi, Farhan Akmal, Mohamed Haris, Sallehuddin, A. Ghani, Jaharah
Published 2019

Comparison of dry and cryogenic machining on chip formation and coefficient of friction in turning AISI 4340 alloy steel

by A. Raof, Natasha, A. Ghani, Jaharah, Syarif, J., Che Haron, Che Hassan, Abdul Hadi, Musfirah
Published 2014