Intermetallics evolution and shear strength of carbon nanotubes- reinforced sn-5sb solder on copper board

by Dele-Afolabi, Temitope Theophilus
Published 2015

Experimental and numerical investigation of plain and Ni-reinforced porous alumina ceramics composites produced with agro-waste pore formers

by Theophilus, Dele-Afolabi Temitope
Published 2018

Physical and mechanical properties enhancement of lead free solders reinforced with carbon nanotubes: a critical review

by Dele-Afolabi, T. T., Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Mohamed Yusoff, Hamdan
Published 2014

Physical and mechanical properties of tilapia scale hydroxyapatite-filled high-density polyethylene composites

by Aiza Jaafar, C. N., Zainol, I., Izyan Khairani, M. I., Dele-Afolabi, T. T.
Published 2022

Investigating the effect of porosity level and pore former type on the mechanical and corrosion resistance properties of agro-waste shaped porous alumina ceramics

by Dele-Afolabi, Temitope T., Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Calin, Recep
Published 2017

Impact of different isothermal aging conditions on the IMC layer growth and shear strength of MWCNT-reinforced Sn-5Sb solder composites on Cu substrate

by T. Temitope, Dele Afolabi, Mohamed Ariff, Azmah Hanim, O. J., Ojo Kupoluyi, R., Calin
Published 2019

Shear analysis of rice husk ash RHA reinforced tin- 0.7-copper composite solders on electroless nickel/immersion silver ENIAg surfaces

by Mohamed Ariff, Azmah Hanim, Chuan, Khang Wei, Temitope T., Dele-Afolabi, Osman, Saliza Azlina
Published 2021

Research trend in the processing and application of macroporous ceramic components

by Dele-Afolabi, Temitope Theophilus, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Calin, Recep
Published 2017

Research trend in the development of macroporous ceramic components by pore forming additives from natural organic matters: a short review

by Dele-Afolabi, Temitope Theophilus, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Calin, Recep
Published 2017

Significant effect of rice husk and sugarcane bagasse pore formers on the microstructure and mechanical properties of porous Al2O3/Ni composites

by Temitope T., Dele-Afolabi, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Zahari, Nur Ismarrubie
Published 2018

Controlling the sintering response in the development of multilayered components produced via powder injection molding route—a review

by Ojo-Kupoluyi, Oluwatosin Job, Mohd Tahir, Suraya, Dele-Afolabi, Temitope Theophilus, Anuar, Mohd Shamsul
Published 2020

Microstructural and shear strength properties of GNSs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish

by K., Vidyatharran, M. A., Azmah Hanim, Dele-Afolabi, T. T., Matori, K. A., O., Saliza Azlina
Published 2021

Factors affecting the quality of technical processes training

by Jaafar, Che Nor Aiza, As'arry, Azizan, Ismail, Rezawati, Zainol, Ismail, T-Dele-Afolabi, Temitope
Published 2021

Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish

by M. A., Azmah Hanim, N., Muhamad Kamil, Wei, Chuan Khang, T. T., Dele‑Afolabi, O., Saliza Azlina
Published 2020

Influence of multi-walled carbon nanotubes on melting temperature and microstructural evolution of Pb-free Sn-5Sb/Cu solder joint

by Theophilus, Dele-Afolabi Temitope, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Mohamed Yusoff, Hamdan, Mohd Tahir, Suraya
Published 2015

Microstructural and shear strength properties of RHA-reinforced Sn–0.7Cu composite solder joints on bare Cu and ENIAg surface finish

by Mohamed Ariff, Azmah Hanim, N., Muhamad Kamil, Wei, Chuan Khang, Temitope T., Dele-Afolabi, Osman, Saliza Azlina
Published 2020

Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish

by Dele-Afolabi, T. T., M. A., Azmah Hanim, K., Vidyatharran, K. A., Matori, O., Saliza Azlina, R., Calin
Published 2022

Agro-waste shaped porous Al2O3/Ni composites: corrosion resistance performance and artificial neural network modelling

by Mohamed Ariff, Azmah Hanim, Zahari, Nur Ismarrubie, Sobri, Shafreeza, Mazlan, Norkhairunnisa, Dele-Afolabi, Temitope Theophilus, Calin, Recep
Published 2018

Tensile strength and corrosion resistance properties of porous Al2O3/Ni composites prepared with rice husk pore-forming agent

by Dele-Afolabi, Temitope Theophilus, Mohamed Ariff, Azmah Hanim, Mazlan, Norkhairunnisa, Sobri, Shafreeza, Calin, Recep, Zahari, Nur Ismarrubie
Published 2018

Rice husk as a pore-forming agent: Impact of particle size on the porosity and diametral tensile strength of porous alumina ceramics

by Dele-Afolabi, T. T., Azmah Hanim, M. A., Jung, D. W., Ilyas, R. A., Calin, R., Nurul Izzah, A. R.
Published 2022