PENGAMATAN PENGARUH "AGING" TERHADAP KARAKTERISTIK PADUAN INGAT BENTUK NI-50,8% AT TI

by KURNIAWAN, TEDI

Corrosion prediction for corrosion rate of carbon steel in oil and gas environment: a review

by Asmara, Y. P., Kurniawan, Tedi
Published 2018

High Temperature Oxidation Behavior of T91 Steel in Dry and Humid Condition

by Yonghao, Leong, Farah, Alia, Kurniawan, Tedi
Published 2016

High-temperature Oxidation of Fe-Cr Steels in Steam Condition - A Review

by Kurniawan, Tedi, Farah Alia, Fauzi, Asmara, Y. P.
Published 2016

Advanced Power Generation using Biomass Wastes from Palm Oil Mills

by Muhammad , Aziz, Kurniawan, Tedi, Takuya , Oda, Takao , Kashiwagi
Published 2017

Chromium Enrichment on P11 Ferritic Steel by Pack Cementation

by F. A., Fauzi, Kurniawan, Tedi, Y. S., Bin, W. S., Wan Harun
Published 2016

Fabrication of micro dimples pattern using ball end mill

by Muhamad Izdhar, Zaki, Saptaji, Kushendarsyah, Ramdan, R. D., Kurniawan, Tedi
Published 2019

Numerical and Experimental Investigation on Tensile Properties of Natural-Sand Reinforced Polypropylene

by A. N., Oumer, M. S., Idris, N. M. M., Ammar, Kurniawan, Tedi
Published 2015

Application of plants extracts as green corrosion inhibitors for steel in concrete - a review

by Asmara, Y. P., Kurniawan, Tedi, Sutjipto, A. G. E., Jamiluddin, Jaafar
Published 2018

Application of plants extracts as green corrosion inhibitors for steel in concrete - a review

by Panca Asmara, Yuli, Kurniawan, Tedi, Edy Sutjipto, Agus Geter, Jafar, Jamiluddin
Published 2018

The effect of temperature on the chromizing process for Ferritic-Martensitic steel

by F, Farah Alia, Kurniawan, Tedi, Ani, Mohd Hanafi, Nandiyanto, Asep Bayu Dani
Published 2017

Influences of Temperature on the Conversion of Ammonium Tungstate Pentahydrate to Tungsten Oxide Particles with Controllable Sizes, Crystallinities, and Physical Properties

by Nandiyanto, Asep Bayu Dani, Munawaroh, Heli Siti Halimatul, Kurniawan, Tedi, Mudzakir, Ahmad
Published 2016

Effects Pre-strain of Carbon Steel on Stress-Strain Diagram in CO2 Environment with the Presence of H2S

by Asmara, Y. P., Juliawati, Alias, J., Jaafar, K., Azuar, J. P., Siregar, Kurniawan, Tedi
Published 2014

Effect of copper-based fillers composition on spreading and wetting behaviour

by W. N. W. M. N., Hissyam, Aiman, Mohd Halil, Kurniawan, Tedi, M., Ishak, Ariga, T.
Published 2017

Design and analysis of lightweight polyetheretherketone (PEEK) front lower control arm

by F. T., Pawi, Rosdi, Daud, Kurniawan, Tedi, Siti Haryani, Tomadi, Salwani, Mohd Salleh, A., Shah
Published 2018

Analyses corrosion prediction software for CO2 corrosion of carbon steel using statistical formulas

by Asmara, Y. P., Sutjipto, A. G. E., Siregar, J. P., Kurniawan, Tedi, Jamiluddin, Jaafar
Published 2019

High temperature oxidation in boiler environment of chromized steel

by F, Farah Alia, Kurniawan, Tedi, Asmara, Yuli Panca, Ani, Mohd Hanafi, Nandiyanto, Asep Bayu Dani,
Published 2017

Improving biocompatibility of cobalt based alloy using chemical etching and mechanical treatment

by Mas Ayu, Hassan, Rosdi, Daud, Sudin, Izman, A., Shah, Mahmood, Anwar, Kurniawan, Tedi, Juliawati, Alias
Published 2018

Influences of solvent types on the formation of graphene in the electrochemical exfoliation method

by Kurniawan, Tedi, Anwar, M. A., Oktiani, R., Ragadhita, R., Nandiyanto, A. B. D., Aziz, M.
Published 2019

Morphology Evaluation of ZrO2 Dip Coating on Mild Steel and its Corrosion Performance in NaOH Solution

by M. A., Anwar, Kurniawan, Tedi, Asmara, Y. P., W. S., Wan Harun, Oumar, A. N., Nandyanto, A. B. D.
Published 2017