Ductile cutting of tungsten carbide

by Liu, K., Li, X.P
Published 2014

Performance of tunable magnetic inductors in relation to the magnetic layer thickness and an applied longitudinal magnetic field in electrodeposition of the magnetic layer

by Ning, N., Li, X.P.
Published 2014

Study of the Reinforcement Percentage of Mg-Al-SiC MMC in Relation to the Mechanical Properties and Machinability

by Li, X.P., Lu, L.
Published 2014

Tolerance of gametophytes of Acrostichum aureum (L.) to salinity and water stress

by Li, X.-P., Ong, B.-L.
Published 2014

Theoretical modelling of cutting forces in helical end milling with cutter runout

by Li, X.P., Li, H.Z.
Published 2014

Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide

by Lee, S.H., Li, X.P.
Published 2014

Milling force prediction using a dynamic shear length model

by Li, H.Z., Li, X.P.
Published 2014

Tool wear characteristics and their effects on nanoscale ductile mode cutting of silicon wafer

by Li, X.P., He, T., Rahman, M.
Published 2014

A micro sensor for non-contact temperature measurement

by Li, X.P., Chan, W.F.
Published 2014

Analytical modelling of the milling process geometry based on the true tooth trajectory

by Li, X.P., Li, H.Z.
Published 2014

Ultrastructural changes in gametophytes of Acrostichum aureum L. cultured in different sodium chloride concentrations

by Li, X.-P., Ong, B.-L.
Published 2014

Responses of photosynthesis to NaCl in gametophytes of Acrostichum aureum

by Li, X.-P., Ong, B.-L.
Published 2014

A numerical study of the effects of cutter runout on milling process geometry based on true tooth trajectory

by Li, H.Z., Li, X.P.
Published 2014

Multiwire core fluxgate

by Ripka, P., Li, X.P., Fan, J.
Published 2014

Machined surface and subsurface in relation to cutting edge radius in nanoscale ductile cutting of silicon

by Arefin, S., Li, X.P., Rahman, M., He, T.
Published 2014

Characteristics of ultrasonic vibration-assisted ductile mode cutting of tungsten carbide

by Liu, K., Li, X.P., Rahman, M.
Published 2014

A pressured air jet approach to tool wear minimization in cutting of metal matrix composites

by Li, X.P., Seah, K.H.W.
Published 2014

Characteristics of high speed micro-cutting of tungsten carbide

by Liu, K., Li, X.P., Rahman, M.
Published 2014

Low power orthogonal fluxgate sensor with electroplated Ni 80Fe20/Cu wire

by Fan, J., Li, X.P., Ripka, P.
Published 2014

Study of the magnetic anisotropy of micron-sized CoFeSiB glass covered amorphous wires

by Fan, J., Chiriac, H., Li, X.P.
Published 2014