Effect of interface wettability on additively manufactured metal matrix composites: a case study of 316L-Y2O3 oxide dispersion-strengthened steel

by Zhai, Wengang, Zhou, Wei, Nai, Sharon Mui Ling
Published 2024

Mitigation of liquation cracking in selective laser melted Inconel 718 through optimization of layer thickness and laser energy density

by Luu, Duy Nghia, Zhou, Wei, Nai, Sharon Mui Ling
Published 2022

Characterization of carbide particle-reinforced 316L stainless steel fabricated by selective laser melting

by Bhowmik, Ayan, Zhai, Wengang, Zhou, Wei, Nai, Sharon Mui Ling
Published 2022

Selective electron beam melting of Co-Cr-Mo : microstructure and mechanical properties

by Tan, Xipeng, Wang, Pan, Nai, Sharon, Liu, Erjia, Tor, Shu Beng
Published 2018

Fracture toughness of 304L austenitic stainless steel produced by laser powder bed fusion

by Kumar, Punit, Zhu, Zhiguang, Nai, Sharon Mui Ling, Narayan, R. L., Ramamurty, Upadrasta
Published 2022

Design and optimization of a three degrees-of-freedom spatial motion compliant parallel mechanism with fully decoupled motion characteristics

by Pham, Minh Tuan, Yeo, Song Huat, Teo, Tat Joo, Wang, Pang, Nai, Sharon Mui Ling
Published 2020

A decoupled 6-dof compliant parallel mechanism with optimized dynamic characteristics using cellular structure

by Pham, Minh Tuan, Yeo, Song Huat, Teo, Tat Joo, Wang, Pan, Nai, Sharon Mui Ling
Published 2021

Cascading of the as-built microstructure through heat treatment and its role on the tensile properties of laser powder bed fused Inconel 718

by Radhakrishnan, R. Jayaraj, Kumar, Punit, Seet, Hang Li, Nai, Sharon Mui Ling, Wang, Pei, Ramamurty, Upadrasta
Published 2022

Characteristics of inconel powders for powder-bed additive manufacturing

by Nguyen, Quy Bau, Zhu, Zhiguang, Sun, Chen-Nan, Wei, Jun, Zhou, Wei, Nai, Sharon Mui Ling
Published 2018

Scanning optical microscopy for porosity quantification of additively manufactured components

by Wang, Pan, Tan, Xipeng, He, Chaoyi, Nai, Sharon Mui Ling, Huang, Ruoxuan, Tor, Shu Beng, Wei, Jun
Published 2020

Mechanical properties and in vitro cytocompatibility of dense and porous Ti–6Al–4V ELI manufactured by selective laser melting technology for biomedical applications

by SANTHOSH SURESH, Sun, Chen-Nan, Tekumalla, Sravya, VINICIUS ROSA, Ling Nai, Sharon Mui, RAYMOND WONG CHUNG WEN
Published 2021

Effect of short-range ordering and grain boundary segregation on shear deformation of CoCrFeNi high-entropy alloys with Al addition

by Babicheva, Rita, Jarlöv, Asker, Zheng, Han, Dmitriev, Sergey, Korznikova, Elena, Nai, Sharon Mui Ling, Ramamurty, Upadrasta, Zhou, Kun
Published 2022

Towards binder jetting and sintering of AZ91 magnesium powder

by Salehi, Mojtaba, Kuah, Kai Xiang, Ho, Jia Hern, Zhang, Su Xia, Seet, Hang Li, Nai, Sharon Mui Ling
Published 2023

Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review

by Kok, Yihong, Tan, Xi Peng, Wang, P., Nai, Sharon Mui Ling, Loh, Ngiap Hiang, Liu, Erjia, Tor, Shu Beng
Published 2018

Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder

by Wang, Pan, Huang, Pengfei, Ng, Fern Lan, Sin, Wai Jack, Lu, Shenglu, Nai, Sharon Mui Ling, Dong, ZhiLi, Wei, Jun
Published 2019

Anisotropic microstructure and mechanical properties of additively manufactured Co–Cr–Mo alloy using selective electron beam melting for orthopedic implants

by Xiang, Ding Ding, Wang, P., Tan, Xi Peng, Chandra, Shubham, Wang, Chengcheng, Nai, Sharon Mui Ling, Tor, Shu Beng, Liu, Wei Qiang, Liu, Erjia
Published 2020

Tailoring short-range order and dislocation evolution in Cr–Co–Ni medium-entropy alloys: a molecular dynamics study

by Jarlöv, Asker, Ji, Weiming, Babicheva, Rita, Tian, Yujia, Hu, Zhiheng, Seet, Hang Li, Tan, Liming, Liu, Feng, Liu, Yong, Nai, Sharon Mui Ling, Ramamurty, Upadrasta, Zhou, Kun
Published 2024