3D printing of high-volume fly ash mixtures for digital concrete construction

by Panda, Biranchi
Published 2019

Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing

by Panda, Biranchi, Tan, Ming Jen
Published 2019

Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing

by Panda, Biranchi, Unluer, Cise, Tan, Ming Jen
Published 2020

Mechanical properties and deformation behaviour of early age concrete in the context of digital construction

by Panda, Biranchi, Lim, Jian Hui, Tan, Ming Jen
Published 2020

Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement

by Lim, Jian Hui, Panda, Biranchi, Pham, Quang-Cuong
Published 2018

Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

by Panda, Biranchi, Ruan, Shaoqin, Unluer, Cise, Tan, Ming Jen
Published 2020

The Disruptive Evolution Of 3D Printing

by Panda, Biranchi, Tan, Ming Jen, Gibson, Ian, Chua, Chee Kai
Published 2016

Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printing

by Panda, Biranchi, Singh, GVP Bhagath, Unluer, Cise, Tan, Ming Jen
Published 2020

Progress in construction automation : review on 3D printing of concrete materials

by Tay, Daniel Yi Wei, Panda, Biranchi, Qian, Ye, Tan, Ming Jen
Published 2021

Current challenges and future potential of 3D concrete printing

by Panda, Biranchi, Tay, Daniel Yi Wei, Paul, Suvash Chandra, Tan, Ming-Jen
Published 2019

Fresh and hardened properties of 3D printable cementitious materials for building and construction

by Paul, Suvash Chandra, Panda, Biranchi, Tan, Ming Jen, Tay, Daniel Yi Wei
Published 2019

Use of magnesium-silicate-hydrate (M-S-H) cement mixes in 3D printing applications

by Panda, Biranchi, Sonat, Cem, Yang, En-Hua, Tan, Ming Jen, Unluer, Cise
Published 2021

Flow and mechanical properties of 3D printed cementitious material with recycled glass aggregates

by Panda, Biranchi, Ting, Andrew Guan Heng, Li, Mingyang, Tan, Ming Jen, Annapareddy, Ashokreddy
Published 2018

Effects of slag addition on bond strength of 3D printed geopolymer mortar : an experimental investigation

by Noor Mohamed, Nisar Ahamed, Panda, Biranchi, Tan, Ming Jen, Tay, Daniel Yi Wei, He, Lewei
Published 2018

Bond strength of 3D printed concrete

by Panda, Biranchi, Tay, Daniel Yi Wei, Ting, Andrew Guan Heng, He, Lewei, Tan, Ming Jen
Published 2018

Additive manufacturing of geopolymer for sustainable built environment

by Panda, Biranchi, Paul, Suvash Chandra, Lim, Jian Hui, Tay, Daniel Yi Wei, Tan, Ming Jen
Published 2018

Measurement of tensile bond strength of 3D printed geopolymer mortar

by Panda, Biranchi, Paul, Suvash Chandra, Noor Mohamed, Nisar Ahamed, Tay, Daniel Yi Wei, Tan, Ming Jen
Published 2018

The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3D printed concrete

by Panda, Biranchi, Noor Mohamed, Nisar Ahamed, Paul, Suvash Chandra, Bhagath Singh, GVP, Tan, Ming Jen, Šavija, Branko
Published 2019

Time gap effect on bond strength of 3D-printed concrete

by Tay, Daniel Yi Wei, Ting, Andrew Guan Heng, Qian, Ye, Panda, Biranchi ., He, Lewei, Tan, Ming Jen
Published 2020

3D printing trends in building and construction industry: a review

by Tay, Yi Wei Daniel, Panda, Biranchi, Paul, Suvash Chandra, Noor Mohamed, Nisar Ahamed, Tan, Ming Jen, Leong, Kah Fai
Published 2018