A new approach to time-optimal path parameterization based on reachability analysis

由 Pham, Hung, Pham, Quang-Cuong
出版 2019

Spattering in selective laser melting : a review of spatter formation, effects and countermeasures

由 Ahmad Anwar, Pham, Quang-Cuong
出版 2018

Robotic manipulation of a rotating chain

由 Pham, Hung, Pham, Quang-Cuong
出版 2019

Time-optimal parabolic interpolation with velocity, acceleration, and minimum-switch-time constraints

由 Lertkultanon, Puttichai, Pham, Quang-Cuong
出版 2016

A Single-Query Manipulation Planner

由 Lertkultanon, Puttichai, Pham, Quang-Cuong
出版 2017

A certified-complete bimanual manipulation planner

由 Lertkultanon, Puttichai, Pham, Quang-Cuong
出版 2019

Planning coordinated motions for tethered planar mobile robots

由 Zhang, Xu, Pham, Quang-Cuong
出版 2020

Effect Of Inert Gas Flow Velocity And Unidirectional Scanning On The Formation And Accumulation Of Spattered Powder During Selective Laser Melting

由 Ahmad Bin Anwar, Pham, Quang-cuong
出版 2016

Selective laser melting of AlSi10Mg : effects of scan direction, part placement and inert gas flow velocity on tensile strength

由 Ahmad Bin Anwar, Pham, Quang-Cuong
出版 2020

Study of the spatter distribution on the powder bed during selective laser melting

由 Ahmad Bin Anwar, Pham, Quang-Cuong
出版 2019

Geometry-aware coverage path planning for depowdering on complex 3D surfaces

由 Do, Van-Thach, Pham, Quang-Cuong
出版 2023

Completeness of randomized kinodynamic planners with state-based steering

由 Caron, Stephane, Pham, Quang-Cuong, Nakamura, Yoshihiko
出版 2017

Automated post-processing of 3D-printed parts: artificial powdering for deep classification and localisation

由 Lim, Joyce Xin-Yan, Pham, Quang-Cuong
出版 2023

The silhouette zoetrope : a new blend of motion, mirroring, depth, and size illusions

由 Veras, Christine, Pham, Quang-Cuong, Maus, Gerrit W.
出版 2019

3D printing of curved concrete surfaces using Adaptable Membrane Formwork

由 Lim, Jian Hui, Weng, Yiwei, Pham, Quang-Cuong
出版 2020

Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement

由 Lim, Jian Hui, Panda, Biranchi, Pham, Quang-Cuong
出版 2018

DFBVS: deep feature-based visual servo

由 Adrian, Nicholas, Do, Van Thach, Pham, Quang-Cuong
出版 2023

Robotic 3D-Printing for Building and Construction

由 Lim, Jian Hui, Pham, Quang-Cuong, Pham, Tien Hung
出版 2016

SCALAR - simultaneous calibration of 2D laser and robot's kinematic parameters using three planar constraints

由 Lembono, Teguh Santoso, Suarez-Ruiz, Francisco, Pham, Quang-Cuong
出版 2020

Departure and conflict management in multi-robot path coordination

由 Lertkultanon, Puttichai, Yang, Jingyi, Pham, Hung, Pham, Quang-Cuong
出版 2020