Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique

by Muhsan, A.S., Ahmad, F., Mohamed, N.M., Raza, M.R.
Published 2013

Surface modification of cellulose fibers from oil palm empty fruit bunches for heavy metal ion sorption and diesel desulphurization

by Nazir, M.S., Ajab, H., Raza, M.R., Abdullah, M.A.
Published 2018

Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites

by Muhsan, A.S., Ahmad, F., Mohamed, N.M., Raza, M.R.
Published 2015

Surface modification of cellulose fibers from oil palm empty fruit bunches for heavy metal ion sorption and diesel desulphurization

by Nazir, M.S., Ajab, H., Raza, M.R., Abdullah, M.A.
Published 2018

Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding

by Shirazi, I., Ahmad, F., Raza, M.R., Muhsan, A.S., Aslam, M.
Published 2015

The role of multi-wall carbon nanotubes in char strength of epoxy based intumescent fire retardant coating

by Ullah, S., Ahmad, F., Shariff, A.M., Raza, M.R., Masset, P.J.
Published 2017

An Influence of Oxygen Flow Rate and Spray Distance on the Porosity of HVOF Coating and Its Effects on Corrosion�A Review

by Raza, A., Ahmad, F., Badri, T.M., Raza, M.R., Malik, K.
Published 2022

Selection of Materials Based on Thermo-Mechanical Properties of Thermal Barrier Coatings and Their Failures�A Review

by Raza, A., Ahmad, F., Badri, T.M., Raza, M.R., Malik, K., Ali, S.
Published 2023

Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique

by Muhsan, A.S., Ahmad, F., Mohamed, N.M., Megat Yusoff, P.S.M., Raza, M.R.
Published 2014

Effects of Sintering Temperature and Cooling Rate on Mechanical Properties of Powder Injection Molded 316L Stainless Steel

by Raza, M.R., Ahmad, F., Mamat, O., Omar, M.A., German, RM, Muhsan, A.S.
Published 2012

Autoclave and ultra-sonication treatments of oil palm empty fruit bunch fibers for cellulose extraction and its polypropylene composite properties

by Abdullah, M.A., Nazir, M.S., Raza, M.R., Wahjoedi, B.A., Yussof, A.W.
Published 2016

Flow induced fiber orientation in short carbon fiber reinforced copper matrix composites

by Ali, S., Ahmad, F., Shirazi, M.I., Malik, K., Raza, M.R., Memon, I.R.
Published 2022

Effects of admixed titanium on densification of 316L stainless steel powder during sintering

by Aslam, M., Ahmad, F., Bintimegat Yusoff, P.S.M., Muhamad, N., Raza, M.R., Irfan Shirazi, M.
Published 2014

Experimental preparation and numerical simulation of high thermal conductive Cu/CNTs Nanocomposites

by Muhsan, A.S., Ahmad, F., Mohamed, N.M., Yusoff, P.S.M.M., Raza, M.R., Afrooz, I.E.
Published 2014

A review of graphene reinforced Cu matrix composites for thermal management of smart electronics

by Ali, S., Ahmad, F., Yusoff, P.S.M.M., Muhamad, N., Oñate, E., Raza, M.R., Malik, K.
Published 2021

Natural Polymer-Based Graphene Oxide Bio-nanocomposite Hydrogel Beads: Superstructures with Advanced Potentials for Drug Delivery

by Rehman, S., Madni, A., Jameel, Q.A., Usman, F., Raza, M.R., Ahmad, F., Shoukat, H., Aali, H., Shafiq, A.
Published 2022

Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - Stainless steel

by Raza, M.R., Ahmad, F., Muhamad, N., Sulong, A.B., Omar, M.A., Akhtar, M.N., Aslam, M., Sherazi, I.
Published 2017

A review of processing techniques for graphene-reinforced metal matrix composites

by Naseer, A., Ahmad, F., Aslam, M., Guan, B.H., Harun, W.S.W., Muhamad, N., Raza, M.R., German, R.M.
Published 2019

Correction to: Fabrication, Evaluation, In Vivo Pharmacokinetic and Toxicological Analysis of pH-Sensitive Eudragit S-100-Coated Hydrogel Beads: a Promising Strategy for Colon Targ...

by Rehman, S., Ranjha, N.M., Shoukat, H., Madni, A., Ahmad, F., Raza, M.R., Jameel, Q.A., Majeed, A., Ramzan, N.
Published 2022

Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks

by Aslam, M., Ahmad, F., Yusoff, P.S.M.B.M., Altaf, K., Omar, M.A., Abdul Khalil, H.P.S., Raza, M.R.
Published 2016