Optimizing cutting parameters in inclined end milling for minimum surface residual stress - Taguchi approach

by Masmiati, N., Sarhan, A.A.D.
Published 2015

Investigation about the characterization of machine tool spindle stiffness for intelligent CNC end milling

by Sarhan, A.A.D., Matsubara, A.
Published 2015

Investigate the characterization of the machine tool spindle stiffness in radial direction for precise monitoring of cutting forces for intelligent machining

by Sarhan, A.A.D., Matsubara, A.
Published 2012

Monitoring of tool wear and surface roughness in end milling for intelligent machining

by Sarhan, A.A.D., El-Zahry, R.M.
Published 2011

Review of improvements in wire electrode properties for longer working time and utilization in wire EDM machining

by Maher, I., Sarhan, A.A.D., Hamdi, M.
Published 2015

Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25) Layer Using CO2Laser

by Yip, M.W., Barnes, S., Sarhan, A.A.D.
Published 2015

Monitoring of tool wear and surface roughness in end-milling for intelligent machining

by Sarhan, A.A.D., El-Zahry, R.M.
Published 2011

Employing Ti nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D2 steel

by Marashi, H., Sarhan, A.A.D., Hamdi, M.
Published 2015

Reduction of power and lubricant oil consumption in milling process using a new SiO 2 nanolubrication system

by Sarhan, A.A.D., Sayuti, M., Hamdi, Mohd
Published 2012

Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine

by Hourmand, M., Sarhan, A. A. D., Noordin, M. Y.
Published 2017

Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061

by Ooi, M.E., Sayuti, Mohd, Sarhan, A.A.D.
Published 2015

Investigating the surface tribology of roller-burnished polymer using the fuzzy rule-based approach

by Al-Saeedi, S., Sarhan, A.A.D., Bushroa, A.R.
Published 2015

Effect of muscle active force and fiber orientation on the left ventricle mechanics of human heart

by Hassan, M.A., Sarhan, A.A.D., Amano, A.
Published 2011

High-precision machining by measuring and compensating the error motion of spindleâs axis of rotation in radial direction

by Sarhan, A.A.D., Matsubara, A., Hassan, M.A.
Published 2011

Sensor-less force-reflecting macro–micro telemanipulation systems by piezoelectric actuators

by Amini, H., Farzaneh, B., Azimifar, F., Sarhan, A.A.D.
Published 2016

Enhancement and verification of a machined surface quality for glass milling operation using CBN grinding tool Taguchi approach

by Sayuti, M., Sarhan, A.A.D., Fadzil, M., Hamdi, M.
Published 2012

Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR–RSM approach

by Hourmand, M., Farahany, S., Sarhan, A.A.D., Noordin, M.Y.
Published 2015

Micro-EDM drilling of tungsten carbide using microelectrode with high aspect ratio to improve MRR, EWR, and hole quality

by Hourmand, M., Sarhan, A. A. D., Noordin, M. Y., Sayuti, M.
Published 2016

Investigating the Machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert

by Barzani, M.M., Sarhan, A.A.D., Farahany, S., Ramesh, S., Maher, I.
Published 2015

Fuzzy logic based model for predicting surface roughness of machined Al-Si-Cu-Fe die casting alloy using different additives-turning

by Barzani, M.M., Zalnezhad, E., Sarhan, A.A.D., Farahany, S., Ramesh, S.
Published 2015