Development And Performance Analysis Of Alumina-Yttria Stabilized Zirconia-Chromia Cutting Tool For High Wear Performance

by Tamin, Norfauzi
Published 2020

Differentiation analysis of surface integrity and wear mechanism AISI 1045 machinability assesment under wet and dry condition

by Norfauzi, Tamin
Published 2017

Adaptive beamforming with 16 element linear array using MaxSIR and MMSE algorithms

by Islam, Md. Rafiqul, Hafriz, Fahmy, Norfauzi, Muhammad
Published 2007

Graphical analysis of ferroresonance modes in a voltage transformer energized through grading capacitance using correlation function

by Ali Z., Peng S.A., Norfauzi M.
Published 2023

Reducing The Risk of Agglomeration and Shrinkage Ceramic Body from Al2O3-ZrO2 Composition

by Norfauzi Tamin, Norfauzi Tamin, Ng Chuan Huat, Ng Chuan Huat, Abdul Hamid, Abdul Hamid, Umar Al Amani Azlan, Umar Al Amani Azlan
Published 2023

Reducing the risk of agglomeration and shrinkage ceramic body from Al2O3-ZrO2 composition / Norfauzi Tamin … [et al.]

by Tamin, Norfauzi, Ng, Chuan Huat, Hamid, Abdul, Azlan, Umar Al Amani
Published 2023

Increasing project success in wellhead and christmas tree manufacturing equipment through risk management culture

by Hamid, Abdul, Baba, Ishak, Tamin, Norfauzi, Darmawan, Agong Setyo, Sani, Winardi
Published 2023

Reducing the risk of agglomeration and shrinkage ceramic body from Al2O3-ZrO2 composition

by Tamin, Norfauzi, Ng, Chuan Huat, Hamid, Abdul, Azlan, Umar Al-Amani
Published 2023

Increasing project success in wellhead and Christmas tree manufacturing equipment through risk management culture

by Hamid, Abdul, Baba, Ishak, Tamin, Norfauzi, Darmawan, Agung Setyo, Sani, Winardi
Published 2024

Effect of pressure on density, porosity and flexural strength during cold isostatic press of alumina-ysz chromia cutting too

by Norfauzi, T., Hadzley, A. B., Azlan, U. A. A., Azhar, A. A., Noorazizi, S.
Published 2021

Pembangunan JIG robot pengimpal bagi mengoptimakan masa pengajaran dan pembelajaran dalam kelas pembuatan (Development of JIG robot welding to optimize teaching and learning time i...

by T., Norfauzi, A.B., Hadzley, AI., zimin, I., Fakhrulnaim, B. J., Hafiz, A., Hassan
Published 2017

Analysis of surface integrity and formation of material side flow in dry and wet machining of aluminum alloy

by A. B., Hadzley, A. A., Anis, M. N., Farizan, M. H., Osman, T., Norfauzi, S., Noorazizi
Published 2018

Analysis of particles size distribution on the agglomeration and shrinkage of Alumina-Zirconia compacts

by Afuza, A. A., Hadzley, A. B., Norfauzi, T., Umar, A. A., Faiz, M., Naim, F., Kunlapat, Thongkaew
Published 2020

Analysis of particles size distribution on the agglomeration and shrinkage of alumina-zirconia compacts

by A. A., Afuza, A. B., Hadzley, T., Norfauzi, A. A., Umar, M., Faiz, F., Naim, Kunlapat, Thongkaew
Published 2020

Friction and wear analysis of ceramic cutting tool made from Alumina-Zirconia-Chromia

by Azhar, Anis Afuza, Abu Bakar, Mohd Hadzley, Tamin, Norfauzi, Azlan, Umar Al-Amani, Hassan, Muhammad Hafiz
Published 2020

Influence of sintering temperature on density, hardness, shrinkage and microstructure of Alumina-Zirconia cutting tool

by A. A. Anis, A. B. Hadzley, A. A Umar, T. Norfauzi, M. R. Fairuz, S. G. Herawan, K. Thongkaew
Published 2022

Influence of sintering temperature on density, hardness, shrinkage and microstructure of alumina-zirconia cutting tool

by A. A., Anis, A. B., Hadzley, A. A., Umar, T., Norfauzi, Fairuz, M. R., Herawan, S. G., Thongkaew, Thongkaew
Published 2021

Fabrication and machining performance of ceramic cutting tool based on the Al2O3-ZrO2-Cr2O3 compositions

by T., Norfauzi, A. B., Hadzley, U. A. A., Azlan, A. A., Afuzaa, M. M., Faiz, M. F., Naim
Published 2019

Effect of sintering temperature on density, hardness and tool wear for alumina-zirconia cutting tool

by A. B., Hadzley, T., Norfauzi, U. A. A., Umar, A. A., Afuza, M. M., Faiz, M. F., Naim
Published 2019

Comparison machining performance of Al2 O3 , ZTA and ZTA doped Cr2 O3 cutting tools on AISI 1045

by T., Norfauzi, A. B., Hadzley, U. A. A., Azlan, M. M., Faiz, M. F., Naim, A. A., Aziz
Published 2019