UPRATING OF FRANCIS WATER TURBINE WITH HEAD OF 42 M AND DISCHARGE OF 0.585 M3/S WITH VARIOUS NACA PROFILE FOR RUNNERâS BLADE

Indonesia's electricity consumption is expected to triple by 2030. The solution to overcome the increasing electricity demand is to use renewable energy for electricity generation. Water is the largest potential renewable energy source in Indonesia. However, the utilization has not been maximiz...

Saved in:

書目詳細資料
主要作者:	Kiasatina, Nabilah
格式:	Final Project
語言:	Indonesia
在線閱讀:	https://digilib.itb.ac.id/gdl/view/38813
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Institut Teknologi Bandung
語言:	Indonesia

相似書籍

ANALYSIS, MODELING, SIMULATION FOR UPRATING FRANCIS TURBINE WITH HEAD 42 M AND FLOW RATE 0.585 M \TEXTSUPERSCRIPT{3}/S.
由: Hendra Setyastanto, Yohanes

DESIGN, MODEL, AND SIMULATION OF FRANCIS WATER TURBINE WITH HEAD OF 42 M AND DISCHARGE OF 0.585 M\TEXTSUPERSCRIPT{3}/S.
由: Azmi Fatimah, Sarah

Design, Model, and Simulation of Francis Turbine with Head of 87.8 m and Discharge of 3.5 m 3 /s
由: Fadel Arraiza Farhan, Muhammad

Design, Model, and Simulation of Francis Turbine with Head of 87.8 m and Discharge of 3.5 m3/s
由: Fadel Arraiza Farhan, Muhammad

FRANCIS TURBINE 3 MW DESIGN WITH HEAD OF 87 M AND FLOW RATE OF 4.2 M\TEXTSUPERSCRIPT{3}/S .
由: Mahendra Pramono, Danur

FRANCIS TURBINE 2 MW DESIGN WITH CASE STUDY KAMBANGAN MINI HYDRO POWER WITH HEAD 87 M AND DISCHARGE 2.8 M3/S
由: Danu Aditya Rachman, Rovky

Design, Modelling, and Simulation of Francis Water Turbine for Cisomang Water Power Plant with Head of 131,07 m and Discharge of 1,61 m3/s
由: KURNIAWAN (NIM : 13113108), JULIO

DESIGN, MODELLING, AND SIMULATION OF FRANCIS WATER TURBINE FOR CISOMANG WATER POWER PLANT WITH HEAD OF 131,07 M AND DISCHARGE OF 1,61 M\TEXTSUPERSCRIPT{3}/S
由: Kurniawan, Julio

DESIGN, MODEL, AND SIMULATION OF FRANCIS WATER TURBINE FOR BAKARU HYDROELECTRIC POWER PLANT WITH NETTO HEAD OF 322,1 M AND MAXIMUM DISCHARGE OF 22,5 M3/S
由: Christoper Maystro, Arnold

THE DESIGN OF 500 KW FRANCIS TURBINE AT 30 M HEAD AND 500 RPM OF ROTATIONAL SPEED
由: Febrianto, Stevanus

MOLD PRODUCTION FOR WAX PATTERN IN INVESTMENT CASTING FOR FRANCIS TURBINE RUNNER'S BLADE
由: SUHERMAN (NIM 13103035), KOKO

Designing and Testing of Horizontal Axis Wind Turbine Three-Blade, 1,37 meters in Diameter with NACA 2415
由: Finianto Eko Prasetyo, Debi

DESIGN OF THE THREE BLADE SCREW TURBINE PROTOTYPE WITH 3M HEAD AND 1 M\TEXTSUPERCRIPT{3}/S FLOW RATE.
由: Hadi, Hardinal

DESIGNING AND TESTING OF HORIZONTAL AXIS WIND TURBINE THREE-BLADE, 1,48 METERS IN DIAMETER WITH NACA 4415 PROFILE.
由: Dwi Anugerah, Aidil

FRANCIS TURBINE 1 MW DESIGN ON MINI HYDROPOWER KAMBANGAN WITH HEAD 87 M AND FLOW RATE 1,4 M\TEXTSUPERSCRIPT{3}/S.
由: Gieraldien Sahertian, Luthfie

THE DESIGN OF FRANCIS TURBINE AT 30 M HEAD AND 500 KW POWER RATING FOR MINI HYDRO POWER GENERATION
由: Yogastama, Agisatyo

THE DESIGN OF FRANCIS TURBINE AT 30 M HEAD AND 500 KW POWER RATING FOR MINI HYDRO POWER GENERATION
由: Yogastama, Agisatyo

NUMERICAL SIMULATION OF PLTMH CIJEDIL FRANCIS TURBINE PERFORMANCE IN CONCERN WITH PARAMETRICAL CHANGES AT RUNNER'S BLADE.
由: Widodo, Doni

Characteristics of NACA0018 Straight Blade Darrieus Water Turbine in a Duct at Various Flow Rates through CFD Analysis
由: Adityo Kumboro, Nizar

Design, Manufacture and Testing Horizontal Axis Wind Turbine Three Blades a Diameter of 2.4 Meters with NACA Profile 2412
由: Kalam Nainggolan, Irwan

DESIGN, MODEL, AND SIMULATION OF PELTON WATER TURBINE WITH HEAD OF 86.5 M AND DISCHARGE 3,5 M\TEXTSUPERSCRIPT{3}/S.
由: Suyudhi Suryakusuma, Muhammad

Design, Modelling, and Simulation of Water Turbine Francis Type on Case Study of Pareang Micro Hydropower with Head 83,71 m and Flow Rate 1,51m 3/s
由: HARASTA FADRUZIL (NIM : 13112018), FARHAN

Design and Numerical Simulation of Cross Flow Water Turbine at Net Head 30 m with Maximum Discharge 0.527 m3/s
由: Kurniawan Purba, Adetya

Design and Numerical Simulation of Cross Flow Water Turbine at Net Head 30 m with Maximum Discharge 0.527 m 3 /s
由: Kurniawan Purba, Adetya

Final Project Title The Design of Francis Turbine at 30 m Head and 500 kW Power Rating for Mini Hydro Power Generation
由: Yogastama-13113007, Agisatyo

PERANCANGAN KINCIR AIR TERAPUNG SUMBU HORIZONTAL 8 BLADES DENGAN MENGGUNAKAN HYDROFOIL NACA
由: , Ardhiant Octavianus, et al.
出版: (2011)

Design and Simulation of a Vertical Kaplan Turbine with 5,17 m Head and 5,725 m3/s Discharge using Computational Fluid Dynamics
由: Zihni, Abi

FRACIS TURBINE 2,5 MW DESIGN.STUDY CASE: KAMBANGAN MINI HYDRO POWER WITH HEAD 85M AND DISCHARGE 7 M\TEXTSUPERSCRIPT{3}/S.
由: Dewo, Gale

ANDROID SUBSYSTEM DEVELOPMENT AS A USER INTERFACE FOR RUNNERâS TIME DATA ACQUISITION SYSTEM
由: Atmaja, Prajogo

Vibratory finishing of turbine blades
由: Lee, Jonathan Yee Hui.
出版: (2009)

PENGUJIAN TURBIN AIR DARRIEUS SUDU NACA 0018 OPTIMIZED PADA KONFIGURASI PARALEL.
由: Maradani Samudro, Eki

DESIGN AND MANUFACTURE OF FIXTURES FOR THE ASSEMBLY OF FRANCIS TURBINE RUNNER
由: SATRIO ADITOMO. A (NIM : 13104040); Pembimbing : Dr. Ing. Ir. Indra Djodikusumo, R.

SIMULASI TURBIN ANGIN SUMBU HORIZONTAL TIPE NACA 6412 PADA BERBAGAI KECEPATAN ANGIN.
由: Pebriandi Rajagukguk, Ricky

OPTIMATION OF STRAIGHT BLADE DARRIEUS TURBINE USING AS HYDRO TURBINE
由: ROSIADI (NIM: 23107010), JEFRI

DEVELOPMENT OF BLADE AND CASCADE OF THE VERY LOW HEAD AXIAL HYDRAULIC TURBINE
由: Muis, Abdul

DESIGN AND NUMERICAL SIMULATION OF 5 MW KAPLAN TURBINE WITH 39 M3/S DISCHARGE USING COMPUTATIONAL FLUID DYNAMICS
由: Febrilian Syah, Muhammad

SIMULASI NUMERIK TURBIN ANGIN KONTRA ROTASI TIPE NACA 6412 PADA BERBAGAI KECEPATAN ANGIN.
由: Riphaldo

Design of Francis Turbine Guide Vane Geometry Measurement System
由: Akmal Firdaus, Yusril

Design of Francis Turbine Guide Vane Geometry Measurement System
由: Akmal Firdaus, Yusril

NUMERICAL SIMULATION IN FRANCIS TURBINE UNDER PARTIAL LOAD CONDITIONS
由: Zakaria, Yahya