DESAIN SISTEM PENGANGKAT SAMPAH PADA SALURAN PLTMH DI DESA MINGGIR
Almost every engineering instrument has their unpredictable weakness during design period. This weakness will be known after running product for a certain time. Microhydro Power Plant at Minggir is one of them. The level of trash contamination from household and nature trash made accumulation on tra...
Saved in:
| Main Authors: | , |
|---|---|
| 格式: | Theses and Dissertations NonPeerReviewed |
| 出版: |
[Yogyakarta] : Universitas Gadjah Mada
2013
|
| 主題: | |
| 在線閱讀: | https://repository.ugm.ac.id/124099/ http://etd.ugm.ac.id/index.php?mod=penelitian_detail&sub=PenelitianDetail&act=view&typ=html&buku_id=64218 |
| 標簽: |
添加標簽
沒有標簽, 成為第一個標記此記錄!
|
| 總結: | Almost every engineering instrument has their unpredictable weakness
during design period. This weakness will be known after running product for a
certain time. Microhydro Power Plant at Minggir is one of them. The level of
trash contamination from household and nature trash made accumulation on
trashrack. thus will affect dependable flow (Qan) and decrease electricity
production of power plant. Most fatal damage was microhidro power plant
shutdown from 2005 (year of build) till now.
Automatic trashrack was built to solve this problem by carrying almost
every trash that came along water flow to the border of Microhidro�s canal. This
system is using natural energy from water flow that has been cleaned. The system
component has two separated parts: activator wheel and lifter wheel. The velocity
of water flow must be equal with flume velocity data. In fact, it was different in
some drop belong to the distance of both wheel.
The value of tip speed ratio at minimum distance of activator wheel was
max: 0.0228 and min: 0.0195, whereas lifter wheel was max: 0.079 and min
0.066. It�s compare to the value of tip speed ratio at maximum distance of
activator wheel was max: 0.0194 and min: 0.018, whereas lifter wheel was max:
0.0848 and min 0.0672. This variance gave us the influence of distance changing
for each condition around 7-9 %. Thus, this condition influence the efficiency of
automatic trashrack. Maximum efficiency has been reach at 70 % and this value
will always change during their fabrication process. |
|---|