Effect of infill parameters on the compressive strength of 3d-printed nylon-based material
3D printing is the most suitable method to manufacture the frame parts of powered ankle-foot prostheses but the compressive strength of the 3D-printed part needs to be ensured. According to the compression test standard ASTM D695, the effect of infill pattern and density, which is transferred to the...
Saved in:
Main Authors: | , , , , , , , |
---|---|
Format: | Article |
Published: |
MDPI
2023
|
Subjects: | |
Online Access: | http://eprints.um.edu.my/39041/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Universiti Malaya |
id |
my.um.eprints.39041 |
---|---|
record_format |
eprints |
spelling |
my.um.eprints.390412023-11-28T04:45:52Z http://eprints.um.edu.my/39041/ Effect of infill parameters on the compressive strength of 3d-printed nylon-based material Liu, Jingjing Naeem, Muhammad Awais Al Kouzbary, Mouaz Al Kouzbary, Hamza Shasmin, Hanie Nadia Arifin, Nooranida Abd Razak, Nasrul Anuar Abu Osman, Noor Azuan QC Physics 3D printing is the most suitable method to manufacture the frame parts of powered ankle-foot prostheses but the compressive strength of the 3D-printed part needs to be ensured. According to the compression test standard ASTM D695, the effect of infill pattern and density, which is transferred to the mass of the standard specimen, on the compressive strength is investigated with a carbon fiber-reinforced nylon material. With the same infill pattern, specimens with more mass have a higher compressive strength. With the same mass, specimens with triangular fill have a higher compressive strength than those with rectangular and gyroid fills. Compared with specimens with a solid fill, specimens with a triangular fill can also provide more compressive strength in a unit mass. According to the results of standard specimens, following the requirement of strength and lightweight, 41% triangular fill is selected to manufacture the supporting part of a powered ankle-foot prosthesis. Under a compressive load of 1225 N, the strain of the assembly of the standard adaptor and the 3D-printed part is 1.32 +/- 0.04%, which can meet the requirement of the design. This study can provide evidence for other 3D-printed applications with the requirement of compressive strength. MDPI 2023-01 Article PeerReviewed Liu, Jingjing and Naeem, Muhammad Awais and Al Kouzbary, Mouaz and Al Kouzbary, Hamza and Shasmin, Hanie Nadia and Arifin, Nooranida and Abd Razak, Nasrul Anuar and Abu Osman, Noor Azuan (2023) Effect of infill parameters on the compressive strength of 3d-printed nylon-based material. Polymers, 15 (2). ISSN 2073-4360, DOI https://doi.org/10.3390/polym15020255 <https://doi.org/10.3390/polym15020255>. 10.3390/polym15020255 |
institution |
Universiti Malaya |
building |
UM Library |
collection |
Institutional Repository |
continent |
Asia |
country |
Malaysia |
content_provider |
Universiti Malaya |
content_source |
UM Research Repository |
url_provider |
http://eprints.um.edu.my/ |
topic |
QC Physics |
spellingShingle |
QC Physics Liu, Jingjing Naeem, Muhammad Awais Al Kouzbary, Mouaz Al Kouzbary, Hamza Shasmin, Hanie Nadia Arifin, Nooranida Abd Razak, Nasrul Anuar Abu Osman, Noor Azuan Effect of infill parameters on the compressive strength of 3d-printed nylon-based material |
description |
3D printing is the most suitable method to manufacture the frame parts of powered ankle-foot prostheses but the compressive strength of the 3D-printed part needs to be ensured. According to the compression test standard ASTM D695, the effect of infill pattern and density, which is transferred to the mass of the standard specimen, on the compressive strength is investigated with a carbon fiber-reinforced nylon material. With the same infill pattern, specimens with more mass have a higher compressive strength. With the same mass, specimens with triangular fill have a higher compressive strength than those with rectangular and gyroid fills. Compared with specimens with a solid fill, specimens with a triangular fill can also provide more compressive strength in a unit mass. According to the results of standard specimens, following the requirement of strength and lightweight, 41% triangular fill is selected to manufacture the supporting part of a powered ankle-foot prosthesis. Under a compressive load of 1225 N, the strain of the assembly of the standard adaptor and the 3D-printed part is 1.32 +/- 0.04%, which can meet the requirement of the design. This study can provide evidence for other 3D-printed applications with the requirement of compressive strength. |
format |
Article |
author |
Liu, Jingjing Naeem, Muhammad Awais Al Kouzbary, Mouaz Al Kouzbary, Hamza Shasmin, Hanie Nadia Arifin, Nooranida Abd Razak, Nasrul Anuar Abu Osman, Noor Azuan |
author_facet |
Liu, Jingjing Naeem, Muhammad Awais Al Kouzbary, Mouaz Al Kouzbary, Hamza Shasmin, Hanie Nadia Arifin, Nooranida Abd Razak, Nasrul Anuar Abu Osman, Noor Azuan |
author_sort |
Liu, Jingjing |
title |
Effect of infill parameters on the compressive strength of 3d-printed nylon-based material |
title_short |
Effect of infill parameters on the compressive strength of 3d-printed nylon-based material |
title_full |
Effect of infill parameters on the compressive strength of 3d-printed nylon-based material |
title_fullStr |
Effect of infill parameters on the compressive strength of 3d-printed nylon-based material |
title_full_unstemmed |
Effect of infill parameters on the compressive strength of 3d-printed nylon-based material |
title_sort |
effect of infill parameters on the compressive strength of 3d-printed nylon-based material |
publisher |
MDPI |
publishDate |
2023 |
url |
http://eprints.um.edu.my/39041/ |
_version_ |
1783876676101341184 |