Determination of free fatty acids in palm oil by near-infrared reflectance spectroscopy

A near-infrared (NIR) spectroscopy calibration was developed for the determination of free fatty acids (FFA) in crude palm oil and its fractions based on the NIR reflectance approach. A range of FFA concentrations was prepared by hydrolyzing oil with 0.15% (w/w) lipase in an incubator at 60°C (200 r...

Full description

Saved in:
Bibliographic Details
Main Authors: Che Man, Yaakob, Moh, M. H.
Format: Article
Language:English
English
Published: AOCS Press 1998
Online Access:http://psasir.upm.edu.my/id/eprint/51713/1/51713.pdf
http://psasir.upm.edu.my/id/eprint/51713/7/J%20Americ%20Oil%20Chem%20Soc%20-%201998%20-%20Man%20-%20Determination%20of%20free%20fatty%20acids%20in%20palm%20oil%20by%20near%E2%80%90infrared%20reflectance.pdf
http://psasir.upm.edu.my/id/eprint/51713/
https://rd.springer.com/article/10.1007/s11746-998-0065-0
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Universiti Putra Malaysia
Language: English
English
Description
Summary:A near-infrared (NIR) spectroscopy calibration was developed for the determination of free fatty acids (FFA) in crude palm oil and its fractions based on the NIR reflectance approach. A range of FFA concentrations was prepared by hydrolyzing oil with 0.15% (w/w) lipase in an incubator at 60°C (200 rpm). Sample preparation was performed in Dutch cup, and the spectra were measured in duplicate for each sample. The optimized calibration models were constructed with multiple linear regression analysis based on C=O overtone regions from 1850–2050 nm. The best wavelength combinations were 1882, 2010, and 2040 nm. Multiple correlation coefficients squared (R2) were: 0.994 for crude palm oil, 0.961 for refined-bleached-deodorized (RBD) palm olein, and 0.971 for RBD palm oil. Calibrations were validated with an independent set of 8–10 samples. R2 of validation were 0.997, 0.943, and 0.945, respectively. The developed method was rapid, with a total analysis time of 5 min, and environmentally friendly, and its accuracy was generally good for raw-material quality control.