Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6
This article presents the tool wear mechanism when machining Aluminium alloy 6061-T6 with PVD coated carbide under dry cutting condition. Cutting parameters selected were cutting speed, Vc = 115-145 m/min; feed rate fz = 0.15-0.2 mm/tooth and depth of cut, ap = 0.5-0.75 mm. The result showed the too...
Saved in:
Main Authors: | , , , , |
---|---|
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2014
|
Subjects: | |
Online Access: | http://eprints.utem.edu.my/id/eprint/13799/1/anaysis_of_tool_performance_idecon2014_submission_117.docx http://eprints.utem.edu.my/id/eprint/13799/ |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Universiti Teknikal Malaysia Melaka |
Language: | English |
Be the first to leave a comment!