Modeling and controller design of a single-linked inverted pendulum using optimized fuzzy logic controller approach

• Main Author: Attia Elhabib, Mohamed Osman
• Format: Thesis
• Language: English
• Published: 2021
• Subjects: TK Electrical engineering. Electronics Nuclear engineering
• Online Access: http://eprints.utm.my/id/eprint/98387/1/MohamedOsmanAttiaElhabibMSEE2021.pdf.pdf; http://eprints.utm.my/id/eprint/98387/; http://dms.library.utm.my:8080/vital/access/manager/Repository/vital:144573
• Institution: Universiti Teknologi Malaysia

Inverted pendulum (IP) is an underactuated systems, since the input of the system is the force applied to the cart and the outputs are the cart position and pendulum angle (SIMO) system, which makes this system is highly nonlinear and unstable. Inverted pendulum considered as the one the most famous classical systems in the field of control and mechatronics. This project focuses on the design of a fuzzy controller to stabilize an inverted pendulum in a vertical position. A continuous correction mechanism is required to move the cart in a certain way in order to balance the pendulum to prevent it from falling down. This project started by a derivation of the mathematical model of the single linked inverted pendulum system by using Euler-Lagrange method. After that, a fuzzy logic controller (FLC) based Sugeno inference system was designed and genetic algorithm was used to tune the parameters of the controller using MATLAB software. Both controllers were tested using real time inverted pendulum. Experimental results showed that optimized FLC was much better than Sugeno FLC in terms of settling time, overshoot and steady state error.