Effect of cutting speed and feed rate on surface roughness of AISI 316l SS using end-milling
This paper investigates the effect of cutting parameters on the surface topography of AISI 316L stainless steel with tungsten carbide tool by using response surface methodology (RSM). Feed rates ranges from 0.10 mm/rev to 0.14 mm/rev while the cutting speeds ranges from 80 m/min to 120 m/min were us...
Saved in:
| Main Authors: | , , , , |
|---|---|
| Format: | Article |
| Published: |
Asian Research Publishing Network
2016
|
| Online Access: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84960363268&partnerID=40&md5=123def59217b7ea64a73a73dc4bdcfcc http://eprints.utp.edu.my/25734/ |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Universiti Teknologi Petronas |