Estimation of stress intensity factors in tubular K-joints using direct and indirect methods

Estimation of stress intensity factors in tubular K-joints using direct and indirect methods

The stress intensity factors at the deepest point and at the crack ends of a surface crack in a tubular K-joint are calculated by direct and indirect methods. In the direct method, the surface crack is modelled explicitly. An automatic mesh generator is developed to produce a well-graded mesh around...

Saved in:

書目詳細資料
Main Authors:	Shao, Y. B., Lie, Seng Tjhen, Li, T.
其他作者:	School of Civil and Environmental Engineering
格式:	Article
語言:	English
出版:	2015
主題:	DRNTU::Engineering::Civil engineering::Structures and design
在線閱讀:	https://hdl.handle.net/10356/104453 http://hdl.handle.net/10220/24674 http://www.ascjournal.com/index.php?option=com_content&view=article&id=110:vol8no1-2&catid=104&Itemid=552
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Numerical models verification of cracked tubular T, Y and K-joints under combined loads
由: Lee, Chi King, et al.
出版: (2014)

Model and mesh generation of cracked tubular Y-joints
由: Lie, Seng Tjhen, et al.
出版: (2014)

Hysteretic behaviour of square tubular T-joints with chord reinforcement under axial cyclic loading
由: Shao, Yong-Bo, et al.
出版: (2014)

Stress intensity factor of cracked steel tubular T and Y-joints under complex loads
由: Huang, Zhiwei.
出版: (2008)

Stress concentration factor of doubler plate reinforced tubular T-joints
由: Erni
出版: (2008)

Stress and strain concentrations of completely overlapped tubular joints
由: Gao, Fei
出版: (2008)

Comparison of fatigue performances of gapped and partially overlapped CHS K-joints
由: Sopha, T., et al.
出版: (2014)

Research on tubular joints at Nanyang Technological University
由: Lie, S. T., et al.
出版: (2014)

Monitoring fatigue crack growth in welded joints using alternating current potential drop (ACPD) technique
由: Lie, Seng Tjhen.
出版: (2008)

Parametric stress analysis of steel multiplanar tubular XT- and XX- joints
由: Wu, Nai Wen.
出版: (2008)

3D evaluation of stress concentration factor and stress intensity factor of welded joints
由: Li, Guiming.
出版: (2008)

Fatigue study of partially overlapped circular hollow section K-joints. Part 1 : geometrical models and mesh generation
由: Lee, Chi King, et al.
出版: (2014)

Ultimate capacities of multiplanar tubular joints
由: Soh, Chee Kiong., et al.
出版: (2011)

Parametric study of welded tubular joints
由: Soh, Chee Kiong., et al.
出版: (2008)

Limit and shakedown analysis of tubular joints
由: Yu, Shengkai.
出版: (2008)

Fatigue study of partially overlapped circular hollow section K-joints. Part 2 : experimental study and validation of numerical models
由: Chiew, Sing Ping, et al.
出版: (2014)

Structural behaviour of completely overlap tubular joints
由: Gho, Wie Min.
出版: (2008)

Parametric study of stengthened multiplanar tubular joints
由: Fung, Tat Ching., et al.
出版: (2008)

Behaviour of multiplanar XX- and XT- tubular joints
由: Liu, Hong Bo.
出版: (2008)

Structural behaviour of completely overlap tubular joints
由: Soh, Chee Kiong., et al.
出版: (2008)

Stress Intensity Factors of Tubular T/Y-Joints Subjected to Three Basic Loading
由: Lie, Seng Tjhen, et al.
出版: (2016)

Structural behaviour of tubular joints under elevated temperature
由: Teo, Raymond Zhia Wee.
出版: (2009)

Parametric study of multiplanar tubular DX- and XT-joints
由: Lee, Wooi Min.
出版: (2009)

Stress concentration factor prediction by the multi-dimensional Lagrangian interpolation method
由: Lee, Chi King, et al.
出版: (2014)

Fatigue strength of circular and rectangular hollow sections subjected to complex loading conditions
由: Lie, Seng Tjhen.
出版: (2009)

Model and mesh generation of cracked Y-tubular joints for SIF and SCF studies
由: Wong, Siew Moh.
出版: (2008)

Fatigue behaviors of square-to-square hollow section T-joint with corner crack II : numerical modeling
由: Lee, Chi King, et al.
出版: (2014)

Fatigue behaviors of square-to-square hollow section T-joint with corner crack I : experimental studies
由: Chiew, Sing Ping, et al.
出版: (2014)

Behavioural study of completely overlapped tubular joints under monotonic and cyclic axial loading
由: Yang, Ye
出版: (2008)

Stress intensity factors of cracked tubular t/y-joints under out-of-plane bending
由: Yee, Chang Wah
出版: (2014)

Stress intensity factors for T-butt surface cracks
由: Tan, Ming Hwa.
出版: (2009)

Fatigue behaviour of uniplanar CHS gap K-joints under axial and in-plane bending loads
由: Shao, Yongbo.
出版: (2008)

Safety assessment of cracked tubular Y-joints using failure assessment diagram (FAD) method
由: Gao, Zhe.
出版: (2013)

Analysis of non-load-carrying and load-carrying fillet welds using dual boundary element method
由: Lie, Seng Tjhen., et al.
出版: (2008)

Adaptive mesh generation procedures for thin-walled tubular structures
由: Lie, S. T., et al.
出版: (2014)

Stress intensity factor solution for root defects in fillet and partial penetration welds
由: Kang, Cheng Xi.
出版: (2009)

Photogrammetry and deformation of tubular connections
由: Tan, Heng Hai.
出版: (2010)

Photogrammetry and deformation of tubular connections
由: Chan, Gavin Yao Zhong.
出版: (2010)

Comparison between 2D and 3D magnification factors M(k) of welded joints
由: Yan, Shuanghong
出版: (2008)

Investigation of stainless steel tubular columns
由: Liu, Yahua.
出版: (2008)