Behaviour of tubular joints subjected to combined loadings

Behaviour of tubular joints subjected to combined loadings

Fatigue analysis of offshore structures requires accurate information on the peak hot spot stress (peak HSS) of tubular joints. To date, literature on the location and magnitude of the peak HSSs of tubular joints subjected to combined loadings is still not widely available. In this project, experime...

Saved in:

書目詳細資料
主要作者:	Yeoh, Seng Keat.
其他作者:	Soh, Chee Kiong
格式:	Theses and Dissertations
語言:	English
出版:	2009
主題:	DRNTU::Engineering::Mechanical engineering::Mechanics and dynamics
在線閱讀:	http://hdl.handle.net/10356/19896
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Behaviour of square-to-square tubular joints subjected to basic and combined loadings
由: Pey, Lay Peng.
出版: (2009)

Behaviour of reinforced welded tubular joints
由: Wong, Looi Kian.
出版: (2009)

Design and fabrication of tubular dielectric elastomer actuator
由: Tan, Desmond Di Teng
出版: (2014)

Finite element analysis of transverse vibrations of beams subjected to axial compressive loads
由: Hoe, Yee Siang
出版: (2023)

Finite element analysis of rectangular composite plates subjected to a uniformly distributed load
由: Ng, Luke Yong Ning
出版: (2023)

Simulation of high strain rate behaviour of aluminium alloy AL6061-T6 under dynamic compression loading
由: Lim, Jian Li.
出版: (2011)

Contact stresses in beams subjected to bending
由: Wang, Jianhong.
出版: (2008)

Vibration of linkages with variable stiffness joints
由: Yeo, Harrison Chong Yi.
出版: (2010)

Thermo-mechanical and fatigue behaviors of solder joints
由: Luo, Guangxing.
出版: (2008)

Strain rate effects on solder joint failure behavior
由: Tan, Kok Ee
出版: (2015)

Design-for-reliability methodology for lead-free solder joints
由: Low, Tse Hoong
出版: (2008)

Characterization of lead free solder joints in microelectronics assemblies
由: Hla Phone Maw.
出版: (2010)

Analytical solutions for bilayered spherical hydrogel subjected to constant dilatation
由: Wang, Dong, et al.
出版: (2013)

Fatigue cumulative damage and crack propagation analysis of welded joints
由: Shi, Zhao Feng.
出版: (2009)

Study of microstructures and mechanical properties of lead-free solder joints
由: Ngoh, Shwu Lan
出版: (2010)

Impact behaviour of thin-walled structures
由: Lu, Guoxing.
出版: (2011)

Rotator cuff tendons of the shoulder joint : anatomy and investigation of strain profile
由: Sheng, Jia-Min
出版: (2013)

Simulation of the tensile loading of a cylindrical gel
由: Mohammad Yasin Abdul Majeed.
出版: (2013)

Dynamic parameter identification of tool holder/tool combination
由: Tan, Kenn Jian Wen.
出版: (2010)

Thin circular composite panels subject to a central concentrated load
由: Yeoh, Yong Chen
出版: (2017)

Investigation of torsionally initiated buckling behaviour of thin-walled beams and columns
由: Seah, Leong Keey., et al.
出版: (2011)

Crack-inclusion interaction in composite materials with aerospace and offshore engineering application
由: Koh, Way Keat
出版: (2018)

Development of a power meter for a bicycle
由: Liew, Keat Ken
出版: (2018)

Investigation of the transient response of dynamic stress intensity factors to impact loads
由: Ng, Kok Kong.
出版: (2009)

Stress analysis of pin-loaded lugs using boundary element methods
由: Neo, Bernice Boon Siew
出版: (2017)

LIDAR+disturbance accommodating control of wind turbine for blade load mitigation
由: Pham, Tien Hung
出版: (2015)

Stress concentration factors for flat bars with projection under uniaxial loading
由: Fu, Ming Han.
出版: (2008)

Numerical investigation on crack growth in girth welded pipeline under various loadings
由: Chia, Chi Yong
出版: (2015)

Finite element analysis using ANSYS for piping structure under self load stress
由: Lim, Woon Lai.
出版: (2009)

Hysteretic behaviour of square tubular T-joints with chord reinforcement under axial cyclic loading
由: Shao, Yong-Bo, et al.
出版: (2014)

Stress and vibration analysis of interference-fitted tubular joints by finite element analysis
由: Tan, Kok Hien
出版: (2023)

Mechanical behaviour of AZ91D and AZ31B magnesium alloys at wide range of strain rates and temperatures
由: Iram Raza Ahmad
出版: (2014)

A numerical solution of a one end fixed glass/epoxy plate having a circular cutout subjected to a uniform shear using displacement potential approach
由: Deb Nath, S. K., et al.
出版: (2013)

Numerical models verification of cracked tubular T, Y and K-joints under combined loads
由: Lee, Chi King, et al.
出版: (2014)

High strain rate behavior of magnesium alloys AZ91D and AZ31B under dynamic tensile loading
由: Chan, Jeffrey Jun Hong.
出版: (2012)

Study on uniaxial tensile and low-cyclic fatigue behaviour of Polyamide 12 fabricated by Multi-Jet Fusion
由: Ng, Wei Hong
出版: (2022)

Part I: A programmable feeder for non-rotational parts. Part II: Development of an automated feeding, joint-straightening and assembly system for pen holders. Part III: Development of an automated tube feeder
由: Chua, Patrick Soon Keong, et al.
出版: (2008)

Buckling and vibration analysis of compressively loaded coil springs by finite element method
由: Tan, Tedrick Heng Wee
出版: (2023)

Fracture mechanics analysis of defence hole system for a uniaxially loaded plate using boundary element method
由: Low, Joseph Jian Liang
出版: (2020)

Effect of diffusion on composite material properties
由: Yeoh, Wu Lieh
出版: (2014)