Development of fabrication process for embedded structure in multi-layer low temperature co-fired ceramics (LTCC) using sacrificial carbon by process modelling and simulation

Development of fabrication process for embedded structure in multi-layer low temperature co-fired ceramics (LTCC) using sacrificial carbon by process modelling and simulation

The most promising method to realise the necessary embedded structure in Low Temperature Co-fired Ceramics (LTCC) is by employing carbon sacrificial material. Process characterisation with respect to carbon burn-off, particularly under embedded condition for dimensional accuracy, is hitherto yet to...

Saved in:

書目詳細資料
主要作者:	Tan, Yeow Meng
其他作者:	Lam Yee Cheong
格式:	Theses and Dissertations
語言:	English
出版:	2013
主題:	DRNTU::Engineering::Manufacturing
在線閱讀:	https://hdl.handle.net/10356/55057
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

A sacrificial process for fabrication of biodegradable polymer membranes with submicron thickness
由: Luke A. Beardslee, et al.
出版: (2018)

Frequency-dependent maximum average power-handling capabilities of single and edge-coupled microstrip lines on low-Temperature co-fired ceramic (LTCC) substrates
由: Yin, W.-Y., et al.
出版: (2014)

Fabrication of lightweight and ultrahigh strength close-cell ceramic foams through sacrificial template method
由: Tan, Alice Shi Yi
出版: (2022)

Effects of forming process and firing temperature on thermal expansion coefficient of ceramic bodies
由: Kachin Saiintawong
出版: (2010)

Effects of forming process and firing temperature on thermal expansion coefficient of ceramic bodies
由: Kachin Saiintawong
出版: (2007)

Positive Photoresist as a Sacrificial Layer for MEMS Micro-component Fabrication with SU-8 Polymer
由: LAU KIA HIAN
出版: (2013)

Development of an alternative rework process for ceramic ball grid array 256 (CBGA256) assembly
由: Chua, Kai Meng.
出版: (2009)

Low temperature sol-gel processing of advanced ceramics
由: Chen, Yunzhong.
出版: (2008)

Prediction of temperature offsets in the epitaxy process
由: Yang, Xuan Wei
出版: (2010)

Carbon black lynn furmatic process
由: Rodriguez, Godofredo R.
出版: (1962)

A project study on the processing of clay raw materials for ceramics
由: Ledonico, Edgar A.
出版: (1963)

Development of a low-temperature co-fired ceramic solid propellant microthruster
由: Zhang, K.L., et al.
出版: (2014)

Low temperature co-fired ceramic vaporizing liquid microthruster for microspacecraft applications
由: Karthikeyan, K., et al.
出版: (2014)

Processing of layer decomposition models using 2-D laser machine
由: Sivakumar Sriram.
出版: (2008)

A Survey of Additive Manufacturing Processes Applied on the Fabrication of Gears
由: Berger, Uwe
出版: (2016)

A low temperature co-fired ceramic solid propellant microthruster for micropropulsion applications
由: Zhang, K., et al.
出版: (2014)

Evaluation of an integrated process of printing and electroless plating for electronic circuit board fabrication
由: Lim, Patricia Li Ying.
出版: (2010)

Multi-orientational deposition to minimize support in the layered manufacturing process
由: Yang, Y., et al.
出版: (2014)

Effect of temperature ramp rate on the sintering of LTCC parts
由: Lee, Cheryl Yuet Mun.
出版: (2011)

Fabrication and testing of bioinspired microstructured alumina composites with sacrificial interpenetrating polymer bonds
由: Sapasakulvanit, Slocha, et al.
出版: (2023)

Fabrication and thermal stress analysis for PZT thin-layered structures
由: Zhang, Yun.
出版: (2008)

Wideband LTCC CPW-fed two-layered monopole antenna
由: Ooi, B.L., et al.
出版: (2014)

In-line monitoring of powder layer quality in powder bed fusion processes
由: Le, Tan Phuc
出版: (2021)

Wire bond process development for low K (dielectric constant) materials
由: Tan, Jonathan Yang Kern.
出版: (2008)

Development of a novel fabrication process for a mechanically tunable 2-D photonic crystal
由: Buddhadev Paul Chaudhuri.
出版: (2010)

Fabrication of fine features using digital light processing stereolithography
由: Chew, Ze Yong
出版: (2015)

Development and Performance Evaluation of a Biomass Gasification System for Ceramic Firing Process
由: Phitsanupong Punnarapong, et al.
出版: (2018)

Development and Performance Evaluation of a Biomass Gasification System for Ceramic Firing Process
由: Phitsanupong Punnarapong, et al.
出版: (2018)

Simulation of Producer Gas Combustion in a Premixed Burner for Ceramic Firing Process
由: Phitsanupong Punnarapong, et al.
出版: (2018)

Development and Performance Evaluation of a Biomass Gasification System for Ceramic Firing Process
由: Punnarapong P., et al.
出版: (2017)

Simulation of Producer Gas Combustion in a Premixed Burner for Ceramic Firing Process
由: Phitsanupong Punnarapong, et al.
出版: (2018)

Temperature sensing and control in multi-zone semiconductor thermal processing
由: YAN HAN
出版: (2010)

Geometric confinement of directly deposited features on hydrophilic rough surfaces using a sacrificial layer
由: Liu, L., et al.
出版: (2014)

Analysis of temperature profile on a PCB in the preheat section of a wave soldering process
由: Hoe, Swee Long.
出版: (2008)

Characterisation of PolyVinyl Alcohol (PVA) as a water-soluble sacrificial layer for affordable surface micromachining
由: Jijo Mathen Varghese
出版: (2013)

Drying conditions and firing temperature of white ware ceramic molded material
由: Mapa, Fernando
出版: (1956)

A project study on activated carbon from coconut shells thru the steam process
由: de Vera, Daniel Ma. Confesor
出版: (1967)

A high-gain microstrip grid array antenna on low temperature co-fired ceramic for 60-GHz applications
由: Zirath, Herbert, et al.
出版: (2013)

Embedded intelligence for manufacturing prognostics
由: Bo Bo Wai Maung.
出版: (2010)

A study of the manufacture of phenol by the regenerative process
由: Martinez, Roberto R.
出版: (1967)