Effect of cold-work on the Hall–Petch breakdown in copper based micro-components
Effects of substructural dimensions on the mechanical properties of micro-pins produced by an open-die micro-extrusion/forging process were studied. Micro-pins of diameter 0.3 mm were manufactured from copper strips, having different initial grain sizes. Micro-compression tests on the micro-pins rev...
Saved in:
Main Authors: | Ghassemali, Ehsan, Tan, Ming-Jen, Wah, Chua Beng, Lim, S.C.V., Jarfors, Anders E.W. |
---|---|
Other Authors: | School of Mechanical and Aerospace Engineering |
Format: | Article |
Language: | English |
Published: |
2016
|
Subjects: | |
Online Access: | https://hdl.handle.net/10356/81567 http://hdl.handle.net/10220/39595 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Language: | English |
Similar Items
-
Grain size and workpiece dimension effects on material flow in an open-die micro-forging/extrusion process
by: Ghassemali, Ehsan, et al.
Published: (2016) -
Numerical analysis of the effect of particle arrangement on mechanical behavior and particle damage in metal matrix nanocomposites
by: Law, E., et al.
Published: (2014) -
Numerical analysis of the effect of particle arrangement on mechanical behavior and particle damage in metal matrix nanocomposites
by: Law, E., et al.
Published: (2014) -
Rate-dependent hardening due to twinning in an ultrafine-grained magnesium alloy
by: Li, B., et al.
Published: (2014) -
On intrinsic brittleness and ductility of intergranular fracture along symmetrical tilt grain boundaries in copper
by: Cheng, Y., et al.
Published: (2014)