Dielectric relaxation in AC powder electroluminescent devices

The dielectric properties of AC powder electroluminescent devices were measured and analyzed using complex impedance spectroscopy to determine the relaxation processes occurring within the devices. The relaxation processes identified were ascribed to the electrode polarization caused by ion accumula...

全面介紹

Saved in:
書目詳細資料
Main Authors: Zhang, Shuai, Su, Haibin, Tan, Chuan Seng, Wong, Terence Kin Shun, Teo, Ronnie Jin Wah
其他作者: School of Electrical and Electronic Engineering
格式: Article
語言:English
出版: 2016
主題:
在線閱讀:https://hdl.handle.net/10356/84544
http://hdl.handle.net/10220/41880
標簽: 添加標簽
沒有標簽, 成為第一個標記此記錄!
id sg-ntu-dr.10356-84544
record_format dspace
spelling sg-ntu-dr.10356-845442020-06-01T10:01:49Z Dielectric relaxation in AC powder electroluminescent devices Zhang, Shuai Su, Haibin Tan, Chuan Seng Wong, Terence Kin Shun Teo, Ronnie Jin Wah School of Electrical and Electronic Engineering School of Materials Science & Engineering A*STAR SIMTech AC powder electroluminescent devices dielectric properties The dielectric properties of AC powder electroluminescent devices were measured and analyzed using complex impedance spectroscopy to determine the relaxation processes occurring within the devices. The relaxation processes identified were ascribed to the electrode polarization caused by ion accumulation at the electrode/resin interfaces, the Maxwell-Wagner-Sillars effects at the (ZnS or BaTiO3) particle/resin interfaces, and the dipolar reorientation of polymer chains in the resin matrix. Each relaxation process was represented by its corresponding equivalent circuit component. Space charge polarization at the electrodes were represented by a Warburg element, a resistor, and a constant phase element. The resin matrix, ZnS/resin and BaTiO3/resin interfaces could each be modeled by a resistor and a capacitor in parallel. The simulated equivalent circuits for three different printed structures showed good fitting with their experimental impedance results. Accepted version 2016-12-19T04:27:39Z 2019-12-06T15:46:56Z 2016-12-19T04:27:39Z 2019-12-06T15:46:56Z 2016 Journal Article Zhang, S., Su, H., Tan, C. S., Wong, T. K. S., & Teo, R. J. W. (2017). Dielectric relaxation in AC powder electroluminescent devices. Solid State Communications, 250, 53-56. 0038-1098 https://hdl.handle.net/10356/84544 http://hdl.handle.net/10220/41880 10.1016/j.ssc.2016.11.010 en Solid State Communications © 2016 Elsevier Ltd. This is the author created version of a work that has been peer reviewed and accepted for publication by Solid State Communications, Elsevier Ltd. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1016/j.ssc.2016.11.010]. 11 p. application/pdf
institution Nanyang Technological University
building NTU Library
country Singapore
collection DR-NTU
language English
topic AC powder electroluminescent devices
dielectric properties
spellingShingle AC powder electroluminescent devices
dielectric properties
Zhang, Shuai
Su, Haibin
Tan, Chuan Seng
Wong, Terence Kin Shun
Teo, Ronnie Jin Wah
Dielectric relaxation in AC powder electroluminescent devices
description The dielectric properties of AC powder electroluminescent devices were measured and analyzed using complex impedance spectroscopy to determine the relaxation processes occurring within the devices. The relaxation processes identified were ascribed to the electrode polarization caused by ion accumulation at the electrode/resin interfaces, the Maxwell-Wagner-Sillars effects at the (ZnS or BaTiO3) particle/resin interfaces, and the dipolar reorientation of polymer chains in the resin matrix. Each relaxation process was represented by its corresponding equivalent circuit component. Space charge polarization at the electrodes were represented by a Warburg element, a resistor, and a constant phase element. The resin matrix, ZnS/resin and BaTiO3/resin interfaces could each be modeled by a resistor and a capacitor in parallel. The simulated equivalent circuits for three different printed structures showed good fitting with their experimental impedance results.
author2 School of Electrical and Electronic Engineering
author_facet School of Electrical and Electronic Engineering
Zhang, Shuai
Su, Haibin
Tan, Chuan Seng
Wong, Terence Kin Shun
Teo, Ronnie Jin Wah
format Article
author Zhang, Shuai
Su, Haibin
Tan, Chuan Seng
Wong, Terence Kin Shun
Teo, Ronnie Jin Wah
author_sort Zhang, Shuai
title Dielectric relaxation in AC powder electroluminescent devices
title_short Dielectric relaxation in AC powder electroluminescent devices
title_full Dielectric relaxation in AC powder electroluminescent devices
title_fullStr Dielectric relaxation in AC powder electroluminescent devices
title_full_unstemmed Dielectric relaxation in AC powder electroluminescent devices
title_sort dielectric relaxation in ac powder electroluminescent devices
publishDate 2016
url https://hdl.handle.net/10356/84544
http://hdl.handle.net/10220/41880
_version_ 1681057337353175040