A 20.2–57.1 GHz Inductor-less Divide-by-4 Divider Chain

In this paper, a 20.2 GHz to 57.1 GHz inductor-less divide-by-4 divider chain based on STMicroelectronics 65nm CMOS technology is presented. As the frequency increasing to millimeter-wave (mm-wave), the divider design becomes more and more challenging, especially in terms of locking range and power...

وصف كامل

محفوظ في:
التفاصيل البيبلوغرافية
المؤلفون الرئيسيون: Yi, Xiang, Liang, Zhipeng, Boon, Chirn Chye
مؤلفون آخرون: School of Electrical and Electronic Engineering
التنسيق: Conference or Workshop Item
اللغة:English
منشور في: 2018
الموضوعات:
الوصول للمادة أونلاين:https://hdl.handle.net/10356/89180
http://hdl.handle.net/10220/44832
الوسوم: إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
المؤسسة: Nanyang Technological University
اللغة: English
الوصف
الملخص:In this paper, a 20.2 GHz to 57.1 GHz inductor-less divide-by-4 divider chain based on STMicroelectronics 65nm CMOS technology is presented. As the frequency increasing to millimeter-wave (mm-wave), the divider design becomes more and more challenging, especially in terms of locking range and power consumption. We proposed a divide-by-2 current mode logic (CML) divider with dynamic loads and merged clock switches, followed by a divide-by-2 injection-locked frequency divider (ILFD) with multi-phase input, to obtain compact area and wide locking range with low power consumption. The measurement results show that the locking range of the divider chain is from 20.2 GHz to 57.1 GHz, or 95% without tuning, with 2dBm input power. The measured power consumption is about 11.5mW at 1.2V supply. Since no inductor is used in our dividers, the area of core circuit is only 30μm by 50 μm.