Analysis of capillary filling in nanochannels with electroviscous effects

• Main Authors: Phan, Vinh-Nguyen, Yang, Chun, Nguyen, Nam-Trung
• Other Authors: School of Mechanical and Aerospace Engineering
• Format: Article
• Language: English
• Published: 2012
• Subjects: DRNTU::Engineering::Mechanical engineering
• Online Access: https://hdl.handle.net/10356/94565; http://hdl.handle.net/10220/7869
• Institution: Nanyang Technological University

Capillary filling is the key phenomenon in planar chromatography techniques such as paper chromatography and thin layer chromatography. Recent advances in micro/nanotechnologies allow the fabrication of nanoscale structures that can replace the traditional stationary phases such as paper, silica gel, alumina, or cellulose. Thus, understanding capillary filling in a nanochannel helps to advance the development of planar chromatography based on fabricated nanochannels. This paper reports an analysis of the capillary filling process in a nanochannel with consideration of electroviscous effect. In larger scale channels, where the thickness of electrical double layer (EDL) is much smaller than the characteristic length, the formation of the EDL plays an insignificant role in fluid flow. However, in nanochannels, where the EDL thickness is comparable to the characteristic length, its formation contributes to the increase in apparent viscosity of the flow. The results show that the filling process follows the Washburn’s equation, where the filled column is proportional to the square root of time, but with a higher apparent viscosity. It is shown that the electroviscous effect is most significant if the ratio between the channel height (h) and the Debye length (κ −1) reaches an optimum value (i.e. κh ≈ 4). The apparent viscosity is higher with higher zeta potential and lower ion mobility.