USING MACHINE LEARNING TO PREDICT BUILDABILITY OF 3D CONCRETE PRINTING

USING MACHINE LEARNING TO PREDICT BUILDABILITY OF 3D CONCRETE PRINTING

Master's

Saved in:

書目詳細資料
主要作者:	ZHANG HAO
其他作者:	CIVIL & ENVIRONMENTAL ENGINEERING
格式:	Theses and Dissertations
語言:	English
出版:	2024
主題:	3D concrete printing, wall-type structure, buildability, fresh properties, numerical simulation, machine learning
在線閱讀:	https://scholarbank.nus.edu.sg/handle/10635/249414
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Comprehensive investigations on the relationship between the 3D concrete printing failure criterion and properties of fresh-state cementitious materials
由: Liu, Zhenbang, et al.
出版: (2023)

3D printing in building and construction
由: Liu, Zhenbang
出版: (2025)

The effect of material fresh properties and process parameters on buildability and interlayer adhesion of 3D printed concrete
由: Panda, Biranchi, et al.
出版: (2019)

Potentials And Challenges In 3D Concrete Printing
由: Wolfs, R. J. M., et al.
出版: (2016)

Sustainable support material for overhang printing in 3D concrete printing technology
由: Ting, Andrew Guan Heng, et al.
出版: (2024)

Development of ductile concrete for visual sensor enabled 3D-printing
由: Lim, Rae-Anne Ying
出版: (2024)

CONSTRUCTABILITY : A WHOLE NEW APPROACH TOWARDS BUILDABILITY
由: KWOK TSUNG WAH
出版: (2019)

Carbon sequestration with 3D concrete printing: potentials and challenges
由: Lim, Sean Gip, et al.
出版: (2025)

Synchronized concrete and bonding agent deposition system for interlayer bond strength enhancement in 3D concrete printing
由: Weng, Yiwei, et al.
出版: (2021)

Axial performances of the steel rebar reinforced column confined by the steel cable reinforced 3D concrete printing permanent formwork
由: Liu, Zhenbang, et al.
出版: (2024)

Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach
由: Weng, Yiwei, et al.
出版: (2021)

EXPERIMENTAL STUDY ON THE SIZING EFFECT OF SHEAR BEHAVIOUR OF 3D PRINTED CONCRETE JOINTS
由: WENG KIAN KOH
出版: (2024)

CONCRETE WITH WASTE MATERIALS FOR CONSTRUCTION 3D PRINTING
由: ONG ZI XIN CHARLOTTE
出版: (2019)

Measurement of tensile bond strength of 3D printed geopolymer mortar
由: Panda, Biranchi, et al.
出版: (2018)

Progress in construction automation : review on 3D printing of concrete materials
由: Tay, Daniel Yi Wei, et al.
出版: (2021)

Improving flexural characteristics of 3D printed geopolymer composites with in-process steel cable reinforcement
由: Lim, Jian Hui, et al.
出版: (2018)

Progress and opportunities for machine learning in materials and processes of additive manufacturing
由: Ng, Wei Long, et al.
出版: (2024)

Extracting BIM information for lattice toolpath planning in digital concrete printing with developed dynamo script : a case study
由: Weng, Yiwei, et al.
出版: (2021)

A BIM-enabled robot control system for automated integration between rebar reinforcement and 3D concrete printing
由: Du, Song, et al.
出版: (2024)

3D printing of curved concrete surfaces using Adaptable Membrane Formwork
由: Lim, Jian Hui, et al.
出版: (2020)

Building information modelling (BIM) enhanced 3D concrete printing
由: Liu, Qinyan
出版: (2024)

Improving surface finish quality in extrusion-based 3D concrete printing using machine learning-based extrudate geometry control
由: Lao, Wenxin, et al.
出版: (2021)

Current challenges and future potential of 3D concrete printing
由: Panda, Biranchi, et al.
出版: (2019)

Variable-geometry nozzle for surface quality enhancement in 3D concrete printing
由: Lao, Wenxin, et al.
出版: (2021)

Time gap effect on bond strength of 3D-printed concrete
由: Tay, Daniel Yi Wei, et al.
出版: (2020)

Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing
由: Panda, Biranchi, et al.
出版: (2019)

BUILDABLE DESIGNS : ASSESSMENT AND EFFECTS
由: ELAINE LEO LI-LIAN
出版: (2019)

Additive manufacturing in the construction industry : the comparative competitiveness of 3D concrete printing
由: Khajavi, Siavash H., et al.
出版: (2021)

Utilization of recycled glass for 3D concrete printing : rheological and mechanical properties
由: Ting, Andrew Guan Heng, et al.
出版: (2020)

Effect of nanostructured silica additives on the extrusion-based 3D concrete printing application
由: Liu, Zhenbang, et al.
出版: (2023)

Concrete 3D printing: process parameters for process control, monitoring and diagnosis in automation and construction
由: Quah, Noel Tan Kai, et al.
出版: (2023)

Increasing the interlayer strength of 3D printed concrete with tooth-like interface: an experimental and theoretical investigation
由: He, Lewei, et al.
出版: (2023)

Stress-cognizant 3D printing of free-form concrete structures
由: Lim, Jian Hui, et al.
出版: (2021)

Extrudable region parametrical study of 3D printable concrete using recycled glass concrete
由: Ting, Andrew Guan Heng, et al.
出版: (2022)

Development of novel concave and convex trowels for higher interlayer strength of 3D printed cement paste
由: He, Lewei, et al.
出版: (2024)

Creating functionally graded concrete materials with varying 3D printing parameters
由: Tay, Daniel Yi Wei, et al.
出版: (2022)

3D printing trends in building and construction industry: a review
由: Tay, Yi Wei Daniel, et al.
出版: (2018)

Integrating buildability principles into ISO 9000 quality management systems
由: Pheng, L.S., et al.
出版: (2013)

3D Printing for Sustainable Construction
由: Tay, Daniel Yi Wei, et al.
出版: (2021)

Concrete with recycled glass as fine aggregates
由: Du, H., et al.
出版: (2014)