Kebolehacuanan suntikan logam mikro SS 316L menggunakan bahan pengikat PEG dan PMMA Mohd

by Ibrahim, Mohd Halim Irwan
Published 2012

The effect of buckling in FRP members

by Ibrahim, Mohd Halim Irwan
Published 2005

Green strength optimization of injection molding proces for novel recycle binder system using Taguchi method

by Ibrahim, Mohd Halim Irwan, Kamarudin, Nurhafizah
Published 2020

Chemi-mechanical pulping of durian rinds

by Masrol, Shaiful Rizal, Ibrahim, Mohd Halim Irwan, Adnan, Sharmiza
Published 2015

A review of metal injection moulding on WC-Co cemented carbide comprised of Grain Growth Inhibitors (GGI)

by Khairudin, Siti Nur Fatimah, Pahroraji, Hazriel Faizal, Alias, Siti Khadijah, Ibrahim, Mohd Halim Irwan
Published 2022

Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system

by Mohamad Nor, N. H., Muhamad, Norhamidi, Jamaludin, Khairur Rijal, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan
Published 2009

Characterization of titanium alloy feedstock for metal injection moulding using palm stearin binder system

by Mohamad Nor, Nor Hafiez, Muhamad, Norhamidi, Jamaludin, Khairur Rijal, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan
Published 2011

Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system

by Mohamad Nor, Nor Hafiez, Muhamad, Norhamidi, Jamaludin, Khairur Rijal, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan
Published 2011

Modeling of germanium-based Perovskite Solar Cell for different hole transport materials and defect density

by Buruhanutheen, Nurul Afiqah, Abdullah, Ahmad Sharmi, Ibrahim, Mohd. Halim Irwan, Ahmad, Fauzan, Ibrahim, Mohd. Haniff
Published 2023

Injection moulding temperature and powder loading influence to the metal injection moulding (MIM) green compact

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Mohd. Nor, Nor Hafiez, Daud, Yusof
Published 2011

Flow behaviour to determine the defects of green part in metal injection molding

by Mohamad Nor, Nor Hafiez, Muhamad, Norhamidi, Muhammad Hussain, Ismail, Jamaludin, Khairur Rijal, Sufizar, Ahmad, Ibrahim, Mohd. Halim Irwan
Published 2009

Taguchi method for the determination of optimised sintering parameters of titanium alloy foams

by Ahmad, S., Muhamad, N., Muchtar, A., Sahari, J., Jamaludin, Khairur Rijal, Ibrahim, Mohd. Halim Irwan, Mohamad Nor, N. H.
Published 2009

Rheological characterization of water atomised stainless steel powder for micro metal injection molding

by Ibrahim, Mohd. Halim Irwan, Muhamad, Norhamidi, Sulong, A. B., Jamaludin, Khairur Rijal, Mohamad Nor, Nor Hafiez, Ahmad, Sufizar
Published 2009

Orthogol array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: best flexure strength

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd Nizam, Ahmad, Sufizar, Ibrahim, Mohd Halim Irwan, Mohamad No, Nor Hafiez
Published 2011

Metal Injection Moulding, orthogonal array, analysis of variance, flexure strength, sintering

by Ibrahim, Mohd. Halim Irwan, Muhamad, Norhamidi, Sulong, A.B., Jamaludin, Khairur Rijal, Mohamad Nor, Nor Hafiez, Ahmad, Sufizar
Published 2009

Taguchi Method for the determition of optimised sintering parameters of titanium alloy foams

by Ahmad, Sufizar, Muhamad, Norhamidi, Muchtar, Andastuti, Sahari, Jaafar, Jamaludin, Khairur Rijal, Ibrahim, Mohd Halim Irwan, Mohamad Nor, Nor Hafiez
Published 2011

Development and characterization of titanium alloy foams

by Ahmad, Sufizar, Muhamad, Norhamidi A., Muchtar, Andanastuti, Sahari, Jaafar, Ibrahim, Mohd. Halim Irwan, Jamaludin, Khairul Rijal, Mohamad Nor, N. H.
Published 2010

Performance of solvent debinding using design of experiment method

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Rahman, M. N. A. B., Amin, Sri Yulis M., Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Murtadhahadi, Murtadhahadi
Published 2009

Application of the Grey-Taguchi method to the optimization of metal injection molding (MIM) process

by Jamaludin, Khairul Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Mohamad Nor, Nor Hafiez, Daud, M. Y. M.
Published 2010

Parameter optimization towards highest micro MIM density by using Taguchi method

by Ibrahim, Mohd Halim Irwan, Muhamad, Norhamidi, Sulong, Abu Bakar, Jamaludin, Khairur Rijal, Mohamad Nor, Nor Hafiez, Ahmad, Sufizar, Harun, Mohd Ruzi, Zakaria, Hafizawati
Published 2010