Characterization of newly developed feedstock in metal injection moulding application using titanium mix with palm stearin binder system / Nor Hafiez Mohamad Nor , Muhammad Hussain...

by Mohamad Nor, Nor Hafiez, Ismail, Muhammad Hussain, Muhamad, Norhamidi
Published 2011

Optimizing sintering process to produce highest density of porous Ti-6Al-4V / Nor Hafiez Mohamad Nor ... [et al.]

by Mohamad Nor, Nor Hafiez, Nor Hafiez, Hazran, Yahaya, Mohd Azman
Published 2018

Development of porous Ti-6Al-4V mix with palm stearin binder by metal injection molding technique

by Jamaludin, Mohamad Ikhwan, Abu Kasim, Nur Atikah, Mohamad Nor, Nor Hafiez, Ismail, Muhammad Hussain
Published 2015

Characterization of titanium alloy feedstock for metal injection moulding using palm stearin binder system

by Mohamad Nor, Nor Hafiez, Muhamad, Norhamidi, Jamaludin, Khairur Rijal, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan
Published 2011

Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system

by Mohamad Nor, Nor Hafiez, Muhamad, Norhamidi, Jamaludin, Khairur Rijal, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan
Published 2011

Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method

by Mohamad Nor, Nor Hafiez, Muhamad, Norhamidi, Ismail, M. H., Jamaludin, Khairur Rijal, Ahmad, S., Ibrahim, M. H. I.
Published 2009

Feedstock characterisation of titanium alloy mix with palm stearin binder system for metal injection moulding

by Mohamad Nor, Nor Hafiez, M., Norhamidi, Ahmad, Sufizar, Ibrahim, Mohd. Halim I., Murtadhahadi, Murtadhahadi, Jamaludin, Khairur Rijal
Published 2009

Flow behaviour to determine the defects of green part in metal injection molding

by Mohamad Nor, Nor Hafiez, Muhamad, Norhamidi, Muhammad Hussain, Ismail, Jamaludin, Khairur Rijal, Sufizar, Ahmad, Ibrahim, Mohd. Halim Irwan
Published 2009

Rheological characterization of water atomised stainless steel powder for micro metal injection molding

by Ibrahim, Mohd. Halim Irwan, Muhamad, Norhamidi, Sulong, A. B., Jamaludin, Khairur Rijal, Mohamad Nor, Nor Hafiez, Ahmad, Sufizar
Published 2009

Orthogol array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: best flexure strength

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd Nizam, Ahmad, Sufizar, Ibrahim, Mohd Halim Irwan, Mohamad No, Nor Hafiez
Published 2011

Metal Injection Moulding, orthogonal array, analysis of variance, flexure strength, sintering

by Ibrahim, Mohd. Halim Irwan, Muhamad, Norhamidi, Sulong, A.B., Jamaludin, Khairur Rijal, Mohamad Nor, Nor Hafiez, Ahmad, Sufizar
Published 2009

Optimization of natural fiber composite parameter using Taguchi approach

by Md Yusof, Fauziah, Abd Rahim, Mohd Khairul Hazami, Samsudin, Ahmad Safwan, Mohamad Nor, Nor Hafiez, Ahmad, Zuraida, Halim, Zahurin
Published 2016

Orthogonal array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: best flexure strength

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, Ahmad, Sufizar, Irwan Ibrahim, Mohd. Halim, Mohamad Nor, Nor Hafiez
Published 2009

Taguchi Method for the determition of optimised sintering parameters of titanium alloy foams

by Ahmad, Sufizar, Muhamad, Norhamidi, Muchtar, Andastuti, Sahari, Jaafar, Jamaludin, Khairur Rijal, Ibrahim, Mohd Halim Irwan, Mohamad Nor, Nor Hafiez
Published 2011

Application of the Grey-Taguchi method to the optimization of metal injection molding (MIM) process

by Jamaludin, Khairul Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Mohamad Nor, Nor Hafiez, Daud, M. Y. M.
Published 2010

Parameter optimization towards highest micro MIM density by using Taguchi method

by Ibrahim, Mohd Halim Irwan, Muhamad, Norhamidi, Sulong, Abu Bakar, Jamaludin, Khairur Rijal, Mohamad Nor, Nor Hafiez, Ahmad, Sufizar, Harun, Mohd Ruzi, Zakaria, Hafizawati
Published 2010

Kesan suhu penyuntikan yang tidak optimum terhadap kecacatan jasad anum pada proses penyuntikan logam (MIM)

by Muhamad, Norhamidi, Murtadhahadi, Murtadhahadi, Che Haron, Che Hassan, Sulong, Abu Bakar, Jamaludin, Khairur Rijal, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Mohamad Nor, Nor Hafiez
Published 2008

Pembebanan serbuk yang optimum bagi bahan suapan daripada SS 316 L, PEG, PMMA dan AS bagi proses pengacuanan suntikan logam (MIM)

by Muhamad, Norhamidi, Murtadhahadi, Murtadhahadi, Che Harun, Che Hassan, Sulong, Abu Bakar, Jamaludin, Khairur Rijal, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Mohamad Nor, Nor Hafiez
Published 2008

Moulding parameter optimisation for the best sintered density

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, M. Amin, Sri Yulis, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Murtadhahadi, Murtadhahadi, Mohamad Nor, Nor Hafiez
Published 2009

Pengaruh tekanan penyuntikan, suhu penyuntikan dan beban serbuk terhadap ketumpatan jasad anum: analisis varian

by Jamaludin, Khairur Rijal, Muhamad, Norhamidi, Ab. Rahman, Mohd. Nizam, M. Amin, Sri Yulis, Ahmad, Sufizar, Ibrahim, Mohd. Halim Irwan, Murtadhahadi, Murtadhahadi, Mohamad Nor, Nor Hafiez
Published 2008