IDENTIFICATION SIGMA PHASE AND CARBIDE IN MATERIAL HP50 IN THE CENTER AREA OF ETHYLENE CRACKING FURNACE AFTER FOUR YEARS OF OPERATION
Ethylene is an important raw material in the petrochemical industry. Ethylene is produced through a thermal cracking process using a radiant ethylene cracking tube. This study uses HP-50 material from the center of a radiant ethylene cracking tube which operates for four years at a temperature of 70...
Saved in:
Main Author: | Aning Sari, Vivian |
---|---|
Format: | Final Project |
Language: | Indonesia |
Online Access: | https://digilib.itb.ac.id/gdl/view/56617 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Institut Teknologi Bandung |
Language: | Indonesia |
Similar Items
-
IDENTIFICATION OF CARBIDE AND SIGMA PHASE IN CAST STAINLESS STEEL TUBE HP50 FROM LOWER PART OF ETHYLENE PLANT RADIANT FURNACE AFTER 4 YEARS OF OPERATION
by: Hafidz, Muhammad -
PHASE IDENTIFICATION OF AUSTENITIC STAINLESS STEEL HP50 IN RADIANT ETHYLENE CRACKING TUBE AFTER 4 YEARS OF OPERATION
by: Fahrell Adlinizar, Muhammad -
EVALUASI PROSES KARBURISASI DALAM TUBE HP-50 PADA BAGIAN ATAS DARI ETHYLENE CRACKING FURNACE SETELAH EMPAT TAHUN OPERASI
by: Prameswari, Anissa -
IDENTIFICATION OF CARBIDES AND SIGMA PHASE IN 304 AUSTENITIC STAINLESS STEEL AFTER 24 YEARS OF SERVICE IN AN ETHYLENE PLANT
by: Evan Reinaldo, Nikolaus -
Use of carbide slag from acetylene industry for activation of ground granulated blast-furnace slag
by: Li, Wentao, et al.
Published: (2022)