Numerical predictions for the effect of negative Poisson's ratio on thermoelastic properties of triply periodic minimal surface-based composites

Numerical predictions for the effect of negative Poisson's ratio on thermoelastic properties of triply periodic minimal surface-based composites

This study investigates the effect of negative Poisson's ratio on thermoelastic properties of triply periodic minimal surfaces (TPMS)-based composites. Schwarz and Gyroid TMPS-based representative volume elements (RVEs) with different volume fractions are generated. Finite element simulations a...

Saved in:

書目詳細資料
Main Authors:	Chawla, Komal, Kiran, Raj
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2022
主題:	Engineering::Mechanical engineering Thermomechanical Finite Element Analysis
在線閱讀:	https://hdl.handle.net/10356/162570
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!
機構:	Nanyang Technological University
語言:	English

相似書籍

Determination of multi-physics effective properties, and actuation response of triply periodic minimal surface based novel photostrictive composites: a finite element analysis
由: Singh, Diwakar, et al.
出版: (2022)

Interpenetrating phase composites with 3D printed triply periodic minimal surface (TPMS) lattice structures
由: Guo, Xiao, et al.
出版: (2023)

Topological programmability of isomerizable polymers
由: Chen, Qionghai, et al.
出版: (2024)

Improvements in the modulus and strength of multi-dimensional hybrid composites through synergistic reinforcement between 1D fiber and 0D particle fillers
由: Markandan, Kalaimani, et al.
出版: (2022)

Determining the most likely site and mode of thermomechanical failure in multi-material systems
由: Tay, A.A.O., et al.
出版: (2014)

Numerical methods for modeling heterogeneous materials
由: TRAN THI QUYNH NHU
出版: (2010)

Numerical and Experimental Study on the Residual Stresses in the Nitrided Steel
由: Song, X., et al.
出版: (2016)

Enhancing the performance of composite phase change materials using novel triply periodic minimal surface structures
由: Fok, Priscilla Jia Yuan, et al.
出版: (2024)

Acoustic absorptions of multifunctional polymeric cellular structures based on triply periodic minimal surfaces fabricated by stereolithography
由: Yang, Wenjing, et al.
出版: (2020)

Thermochemical analysis of local commercial sealants
由: Garcia, Emmanuel V., et al.
出版: (2007)

Thermomechanical behavior of flexible composite substrate for microelectronic packaging
由: Zuñega, Jonee Christine, et al.
出版: (2003)

Minimal surfaces existence, uniqueness and computation
由: SANDI TIN MAUNG
出版: (2010)

Numerical Modelling of Scale-Dependent Damage and Failure of Composites
由: CHEN BOYANG
出版: (2014)

Numerical Study on Negative Skin Friction of Single Pile
由: GWEE BOON HONG
出版: (2015)

Residual stresses in single particle splat of metal cold spray process – numerical simulation and direct measurement
由: Song, Xu, et al.
出版: (2020)

Finite element analysis of stress and free vibration of beams under elastoplastic loading conditions using ANSYS finite element software
由: Ng, Celeste
出版: (2024)

Press-braked stainless steel channel section columns failing by flexural buckling : testing, numerical simulation and design
由: Zhang, Lulu, et al.
出版: (2022)

Numerical and analytical methods for in-plane dynamic response of annular disk
由: Koh, C.G., et al.
出版: (2014)

Negative poisson’s ratio of sulfides dominated by strong intralayer electron repulsion
由: Zhu, Yucheng, et al.
出版: (2024)

A new numerical method for rotating systems in engineering analysis and design
由: SZE PAN PAN
出版: (2010)

Numerical and experimental study of contact behavior in the tool-based micromachining of steel
由: Woon, K.-S., et al.
出版: (2014)

Nonlinear 3D numerical computations for the square membrane versus experimental data
由: Wang, S., et al.
出版: (2014)

Numerical Study Of Pile Capacity Considering Installation And Negative Skin Friction Effects
由: SUN JIE
出版: (2013)

Thermomechanical properties of polybenzoxazine modified with dianhydrides
由: Boonthariga Ramsiri
出版: (2011)

Finite element analysis of rectangular composite plates subjected to a uniformly distributed load
由: Chin, Yan Hunk
出版: (2024)

Finite element analysis (using ANSYS) of curvature-correction of in-grown human toe-nail with corrective elastic strips pasted on to the nail surface
由: Koh, Kai Xin
出版: (2024)

On simultaneous positive and negative Poisson's ratio laminates
由: Lim, T.-C.
出版: (2014)

Numerical modelling of anchor-soil interaction
由: LIU KAOXUE
出版: (2010)

Numerical Methods and Comparison for Simulating Long Streamer Propagation
由: HUANG MENGMIN
出版: (2014)

A heat and mass transfer model for bread baking: An investigation using numerical schemes
由: GIBIN GEORGE POWATHIL
出版: (2010)

Numerical simulation of stretchable and foldable silicon integrated circuits
由: Liu, Z., et al.
出版: (2014)

Experimental and numerical investigation on precast CECFST column-to-column connections subjected to axial and eccentric compression
由: Zhu, Gaoming, et al.
出版: (2023)

Single-layer MoS₂: a two-dimensional material with negative Poisson’s ratio
由: Zhu, Yucheng, et al.
出版: (2023)

Stress Concentration Due to Shear Lag Effect in Simply Supported Steel Box Girders with Longitudinal Stiffeners
由: Tanpitcha Pumphaka, et al.
出版: (2020)

Behavior of vertical and lateral load on T-Shape barrette and bored piles
由: Chanchai Submaneewong
出版: (2011)

Comparative study on fatigue evaluation of suspenders by introducing actual vehicle trajectory data
由: Pan, Yue, et al.
出版: (2024)

Design and modeling of a programmable morphing structure with variable stiffness capability
由: Chen, Tianyu, et al.
出版: (2024)

Moment redistribution capacity in prestressed concrete continuous beams
由: Luo, Da, et al.
出版: (2024)

Design and analysis of a new hybrid excitation vernier motor with reduced permanent magnet
由: Zhu, Jingwei, et al.
出版: (2025)

Static strength of T-joints reinforced with doubler or collar plates. II: Numerical simulations
由: Van Der Vegte, G.J., et al.
出版: (2014)