Power consumption and thermal performance of integrated spray and jet array cooling vapor chambers

Power consumption and thermal performance of integrated spray and jet array cooling vapor chambers

An integrated arrayed spray impingement vapor chamber (ISVC) is designed for cooling high-power electronic devices. The spray array is arranged on the vapor chamber to measure thermal performance in comparison with the other two integrated arrayed jet impingement vapor chambers (IJVCs) with differen...

Saved in:

書目詳細資料
Main Authors:	Yi, Li, Chen, Chaomeng, Duan, Fei, Pan, Minqiang
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2022
主題:	Engineering::Mechanical engineering Spray Cooling Jet Impingement
在線閱讀:	https://hdl.handle.net/10356/163358
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Thermal performance and flow pattern of an immersion spray array cooling vapor chamber
由: Yi, Li, et al.
出版: (2023)

Impinging jet flows for micro-cooling
由: NE MOE
出版: (2010)

Confined jet impingement boiling in a chamber with staggered pillars
由: Qiu, Lu, et al.
出版: (2020)

Flow and mixing characteristics of confined impinging and opposing jets
由: WANG SHIJUN
出版: (2010)

Correlations for heat transfer characteristics of the onset of nucleate boiling in submerged jet impingement
由: Fan, Simiao, et al.
出版: (2022)

Impingement of propeller jet on a vertical quay wall
由: Wei, Maoxing, et al.
出版: (2021)

Vortical structures and behaviour of an elliptic jet impinging upon a convex cylinder
由: Long, J., et al.
出版: (2020)

Temporal variation of the pressure from a steady impinging jet model of dry microburst-like wind using URANS
由: Skote, Martin, et al.
出版: (2018)

The jet impingement boiling heat transfer with ad hoc wall thermal boundary conditions
由: Qiu, Lu, et al.
出版: (2017)

Cooling of electronic components with free jet impingement boiling
由: Tay, A.A.O., et al.
出版: (2014)

A micro-machined micro-jet impingement cooling device
由: LWIN LWIN OO
出版: (2010)

Turbulence measurements in the impinging region of a circular jet
由: Rajaratnam, N., et al.
出版: (2014)

Dynamic performance analysis and thermal modelling of a novel two-phase spray cooled rack system for data center cooling
由: Liu, Pengfei, et al.
出版: (2023)

Numerical modeling of pulsed laminar opposed impinging jets
由: Qiu, S., et al.
出版: (2014)

Energy-efficient thermal drying using impinging-jets with time-varying heat input - A computational study
由: Kurnia, J.C., et al.
出版: (2014)

A STUDY OF INTERMITTENT SPRAY COOLING FOR THERMAL MANAGEMENT OF ELECTRONICS
由: SIVANAND SOMASUNDARAM
出版: (2013)

Influence of air on heat transfer of a closed-loop spray cooling system
由: Liu, Pengfei, et al.
出版: (2022)

Effect of large temperature differences on local nusselt number under turbulent slot impingement jet
由: Shi, Y., et al.
出版: (2014)

Flow and mixing characteristics of multiple and multi-set opposing jets
由: Wang, S.J., et al.
出版: (2014)

A numerical study of flow and mixing characteristics of three-dimensional confined turbulent opposing jets: Unequal jets
由: Wang, S.J., et al.
出版: (2014)

Experimental study on heat transfer enhancement using combined surface roughening and macro-structures in a confined double-nozzle spray cooling system
由: Liu, Pengfei, et al.
出版: (2022)

Enhanced performance with an impinging jet flow configuration for PEMFC
由: Poh, H.J., et al.
出版: (2014)

An experimental study of closed loop intermittent spray cooling of ICs
由: Somasundaram, S., et al.
出版: (2014)

Heat transfer under a pulsed slot turbulent impinging jet at large temperature differences
由: Xu, P., et al.
出版: (2014)

Turbulent impinging jet heat transfer enhancement due to intermittent pulsation
由: Xu, P., et al.
出版: (2014)

A study on the heat and mass transfer properties of multiple pulsating impinging jets
由: Xu, P., et al.
出版: (2014)

Numerical study on the effect of cross-flow on turbulent flow and heat transfer characteristics under normal and oblique semi-confined impinging slot jets
由: Shi, Y., et al.
出版: (2014)

Thermal performance of cold plates
由: Ang, Shao Wei
出版: (2024)

Numerical and Experimental Investigation of Single and Two-Phase Impinging Jet Heat Transfer
由: LOU ZHENGQUAN
出版: (2010)

An optimization method for formulating model-based jet fuel surrogate by emulating physical, gas phase chemical properties and threshold sooting index (TSI) of real jet fuel under engine relevant conditions
由: Yu, W, et al.
出版: (2020)

BUBBLE DYNAMICS IN FLUID PUMPING AND FORMATION OF SPRAYS AND JET
由: KARRI BADARINATH
出版: (2012)

A comparative study of five low Reynolds number k-ε models for impingement heat transfer
由: Wang, S.J., et al.
出版: (2014)

Impingement heat transfer effects on baking of flat bread
由: Banooni, S., et al.
出版: (2014)

Flow and heat transfer characteristics of confined noncircular turbulent impinging jets
由: Zhao, W., et al.
出版: (2014)

Baking of flat bread in an impingement oven: An experimental study of heat transfer and quality aspects
由: Banooni, S., et al.
出版: (2014)

Non-swirling steady and transient flow simulations in short-form spray dryers
由: Woo, M.W., et al.
出版: (2014)

The ejecting lamella of impacting compound droplets
由: Liu, Dongdong, et al.
出版: (2019)

Jets and sprays arising from a spark-induced oscillating bubble near a plate with a hole
由: Karri, Badarinath, et al.
出版: (2013)

A review of two-phase submerged boiling in thermal management of electronic cooling
由: Fan, Simiao, et al.
出版: (2022)

Mitigation of under-expanded supersonic jet noise through stepped nozzles
由: Wei, Xiaofeng, et al.
出版: (2021)