Development of an integrated board of power and interface for UAV
Unmanned Aerial Vehicle(UAV), A very complicated aircraft that contain vary different part, We don't just make sure each part can work separately, but also when everything put together, it must function properly too. Normally we are using battery pad to supply power to the UAV, but the outpu...
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Final Year Project |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/10356/67946 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Nanyang Technological University |
| Language: | English |
| Summary: | Unmanned Aerial Vehicle(UAV), A very complicated aircraft that contain vary
different part, We don't just make sure each part can work separately, but also when
everything put together, it must function properly too. Normally we are using battery
pad to supply power to the UAV, but the output power of the battery pad is not
constant due to long time usage. In this project, our main job is to make sure we can
give the constant desired voltage output to supply power to the other parts of UAV
such as Motor, sensor etc. Build the circuit to expand the output port of USB because
there is many signals transmit during flying, so we must make sure that there is
sufficient input or output port for the UAV.This report will show the principle of
building these circuits, why we choose the these components in our design and the
logic when we building the circuits. The software Altium-designer (AD) will also be
introduce in this report, to show how to draw circuits by using this software and the
final product of the PCB board. |
|---|