Development of an integrated board of power and interface for UAV

• Main Author: Zheng, Chao
• Other Authors: Xie Lihua
• Format: Final Year Project
• Language: English
• Published: 2016
• Subjects: DRNTU::Engineering
• Online Access: http://hdl.handle.net/10356/67946
• Institution: Nanyang Technological University

Unmanned Aerial Vehicle(UAV), A very complicated aircraft that contain vary different part, We don't just make sure each part can work separately, but also when everything put together, it must function properly too. Normally we are using battery pad to supply power to the UAV, but the output power of the battery pad is not constant due to long time usage. In this project, our main job is to make sure we can give the constant desired voltage output to supply power to the other parts of UAV such as Motor, sensor etc. Build the circuit to expand the output port of USB because there is many signals transmit during flying, so we must make sure that there is sufficient input or output port for the UAV.This report will show the principle of building these circuits, why we choose the these components in our design and the logic when we building the circuits. The software Altium-designer (AD) will also be introduce in this report, to show how to draw circuits by using this software and the final product of the PCB board.