On the comparison of diamond honeycomb and 3D-Kagome structures for 3D printed UAVs
This study elaborates developing two different types of cellular internal structures to improve the bending stiffness and to reduce the weight of a vertical take-off and landing unmanned aerial vehicle (UAV). Whereas the number of different cellular structures is limited in traditional manufactur...
Saved in:
Main Authors: | Govdeli, Yunus, Ravindrababu, Suraj, Kayacan, Erdal, Low, Jing Ming |
---|---|
Other Authors: | School of Mechanical and Aerospace Engineering |
Format: | Conference or Workshop Item |
Language: | English |
Published: |
2018
|
Subjects: | |
Online Access: | https://hdl.handle.net/10356/88576 http://hdl.handle.net/10220/45860 |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Institution: | Nanyang Technological University |
Language: | English |
Similar Items
-
Evaluation of the influence of build and print orientations of unmanned aerial vehicle parts fabricated using fused deposition modeling process
by: Ravindrababu, Suraj, et al.
Published: (2020) -
Feasibility studies of post-processing techniques to strengthen 3D printed UAV wing structures
by: Govdeli, Yunus, et al.
Published: (2018) -
Compressive behavior of strut reinforced Kagome structures fabricated by fused deposition modeling
by: Gautam, Rinoj, et al.
Published: (2018) -
Guidelines for 3D printed springs using material extrusion
by: Enea, Sacco, et al.
Published: (2022) -
Discrete homogenization of fused deposition modeling parts using the finite element method
by: Ravindrababu, Suraj, et al.
Published: (2018)