Low cost and high resolution X-ray lithography for fabrication of microactuator
In this work, low-cost and high resolution X-ray lithography is developed by employing low-cost sputtered lift-off lead film on mylar sheet substrate and applied for fabrication of electrostatic actuators. X-ray mask was fabricated by conventional photolithography, Pb sputtering and lift-off process...
Saved in:
| Main Authors: | , , , , , |
|---|---|
| Format: | Book Series |
| Published: |
2017
|
| Online Access: | https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79960049654&origin=inward http://cmuir.cmu.ac.th/jspui/handle/6653943832/43030 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Chiang Mai University |
| Summary: | In this work, low-cost and high resolution X-ray lithography is developed by employing low-cost sputtered lift-off lead film on mylar sheet substrate and applied for fabrication of electrostatic actuators. X-ray mask was fabricated by conventional photolithography, Pb sputtering and lift-off process. The Pb mask is used for X-ray lithography of electrostatic actuator structures with 5 μm interdigitate electrodes. For 140 μm-thick SU-8 photoresist on Cr-coated glass substrates, Pb film thickness of around 10 μm was used to block X-ray with 95% x-ray image contrast at a critical dose of 4,200mJ/cm 3 . A high aspect ratio of 26.5 of SU8 microstructure with 5 μm lateral resolution has been achieved by the developed low cost Pb based X-ray mask. In addition, a steep sidewall angle of nearly 90° for SU-8 structure is confirmed. The results demonstrate that the Pb based X-ray mask offers high resolution X-ray lithography at a very low cost and is promising for microactuator applications. © (2011) Trans Tech Publications, Switzerland. |
|---|