Modelling of Powder Die Compaction

Modelling of Powder Die Compaction

341 p.

Saved in:

書目詳細資料
主要作者:	P. R. Brewin, O. Coube, P. Doremus, J. H. Tweed.
格式:	圖書
語言:	English
出版:	Springer 2017
主題:	Engineering
在線閱讀:	http://repository.vnu.edu.vn/handle/VNU_123/29366
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

A STUDY OF COMPRESSION DIE DESIGN ON THE COMPACTION OF PHARMACEUTICAL POWDER
由: TEH LIAM CHEE
出版: (2020)

Finite element modelling of powder compaction process
由: Rajalingam Manimaran
出版: (2008)

Colloidal processing of sub-micron alumina powder compacts
由: Lim, L.C., et al.
出版: (2014)

A study on roller compaction of powders
由: CHEE SZE NAM
出版: (2010)

A STUDY ON DIE FILL AND POWDER FLOW ON MINI-TABLET PRODUCTION
由: GOH HUI PING
出版: (2019)

Influence of microstructure topology on the mechanical properties of powder compacted materials
由: Lai, Chang Quan, et al.
出版: (2021)

Titanium in cardiac valve prostheses: A discussion on the compaction, compressive and tensile properties of pure titanium powder metallurgical compacts
由: Seah, K.H.W., et al.
出版: (2014)

Wie die Berichte über die menschliche Entwicklung die Welt verändern
由: JOSHI, Devin K., et al.
出版: (2015)

A numerical study of the effect of die, die pad and die attach thicknesses on thin plastic packages
由: Tay, A.A.O., et al.
出版: (2014)

Die-Die-Sie danYuw-Die-Sie
由: Perpustakaan UGM, i-lib
出版: (1998)

Deep-learning based IC die identification and die surface defect inspection
由: Teo, Kai Yu
出版: (2023)

Dying for galunggong
由: Contreras, Antonio P.
出版: (2019)

Feature categorization and modelling of progressive die based on STEP
由: Yang, Eng Tsin
出版: (2009)

Investigation of die cracking problems in Fastech
由: Paran, Alexander P.
出版: (2004)

Microstructural evolution during sintering of near-monosized agglomerate-free submicron alumina powder compacts
由: Lim, L.C., et al.
出版: (2014)

Effect of particle size distribution on sintering of agglomerate-free submicron alumina powder compacts
由: Ma, J., et al.
出版: (2014)

EFFECT OF PARTICLE SIZE DISTRIBUTION ON SINTERING OF SUB-MICRON ALUMINA POWDER COMPACTS
由: MA JAN
出版: (2020)

Cost modeling and cost assessment for a die casting process
由: Kong, Kang Kang.
出版: (2010)

Development of a semi-automated die casting die design system
由: Fuh, J.Y.H., et al.
出版: (2014)

Semi-automated parametric design of gating systems for die-casting die
由: Wu, S.H., et al.
出版: (2014)

Processing and performance of magnesium die castings
由: Huang, Yingjue.
出版: (2008)

Compact modeling of high voltage transistors
由: Zhou, Hongtao
出版: (2016)

Development of a die design system for die casting
由: Woon, Y.K., et al.
出版: (2014)

PERANCANGAN TOOTH PLATE DIES
由: PRASETIA P., KRESNAJAYA

Feature-based parametric design of a gating system for a die-casting die
由: Wu, S.H., et al.
出版: (2014)

The selection of die backside metallization for solder
由: Tirol, D.J. Rean D., et al.
出版: (2001)

The strength of the silicon die in flip-chip assemblies
由: Chen, Z., et al.
出版: (2012)

Design and analysis of a progressive die
由: Joseph, Augustine
出版: (2008)

The art of dying
由: Kumar, Namita
出版: (2020)

Dying to talk
由: Chan, Lynn Xiao Ying, et al.
出版: (2020)

The die is cast
由: Sadang, Arnulfo A.
出版: (1980)

Dying to defrost
由: Abeyasekera, Heather Ann
出版: (2022)

Geometric modelling of IC die bonds for inspection
由: Ngan, K.N., et al.
出版: (2014)

Application of case-based reasoning in die-casting die design
由: Lee, K.S., et al.
出版: (2014)

Is Chabacano dying?
由: Genuino, Cecilia F.
出版: (2012)

Design and production of dies for micro wire drawing
由: Tan, Guo Dong.
出版: (2010)

Compact modeling for GaN HEMT devices
由: Binit Syamal
出版: (2017)

Destined to die: Apoptosis and pediatric cancers
由: Choo, Z., et al.
出版: (2021)

Scalable compact modeling for nanometer CMOS technology
由: See, Guan Huei
出版: (2009)

Adaptive control of rotor vibration using compact wavelets
由: Matt O.T. Cole, et al.
出版: (2018)