Evaluation of the influence of build and print orientations of unmanned aerial vehicle parts fabricated using fused deposition modeling process

Evaluation of the influence of build and print orientations of unmanned aerial vehicle parts fabricated using fused deposition modeling process

The principal objective of this study is to provide an insight into the simulation of fused deposition modeling (FDM) parts considering the influence of build and print orientations. The elastic modulus, strength and Poisson's ratio at different build and print orientations are obtained by perf...

Saved in:

書目詳細資料
Main Authors:	Ravindrababu, Suraj, Govdeli, Yunus, Wong, Zhuo Wei, Kayacan, Erdal
其他作者:	School of Mechanical and Aerospace Engineering
格式:	Article
語言:	English
出版:	2020
主題:	Engineering::Mechanical engineering Fused Deposition Modeling Mechanical Behaviour
在線閱讀:	https://hdl.handle.net/10356/138769
標簽:	添加標簽沒有標簽, 成為第一個標記此記錄!

相似書籍

Discrete homogenization of fused deposition modeling parts using the finite element method
由: Ravindrababu, Suraj, et al.
出版: (2018)

On the comparison of diamond honeycomb and 3D-Kagome structures for 3D printed UAVs
由: Govdeli, Yunus, et al.
出版: (2018)

Compressive behavior of strut reinforced Kagome structures fabricated by fused deposition modeling
由: Gautam, Rinoj, et al.
出版: (2018)

MODEL-BASED MONITORING OF NOZZLE CLOGGING IN FUSED DEPOSITION MODELLING PROCESS
由: YEDIGE TLEGENOV
出版: (2018)

Process and material behavior modeling for a new design of micro-additive fused deposition
由: Monzón, M.D., et al.
出版: (2014)

Guidelines for 3D printed springs using material extrusion
由: Enea, Sacco, et al.
出版: (2022)

Feasibility studies of post-processing techniques to strengthen 3D printed UAV wing structures
由: Govdeli, Yunus, et al.
出版: (2018)

Process-structure-properties in polymer additive manufacturing via material extrusion : a review
由: Goh, Guo Dong, et al.
出版: (2020)

Additive Manufacturing of Unmanned Aerial Vehicles: Current Status, Recent Advances, and Future Perspectives
由: Wong, Zhuo Wei, et al.
出版: (2016)

Curved layer fused deposition modeling in conductive polymer additive manufacturing
由: Diegel, O., et al.
出版: (2014)

Fabrication of design-optimized multifunctional safety cage with conformal circuits for drone using hybrid 3D printing technology
由: Goh, Guo Liang, et al.
出版: (2022)

Water Absorption And Mechanical Properties Evaluation Of Surface Modified Abs Printing Parts
由: Leite, Marco, et al.
出版: (2016)

Evaluation of structural epoxy and cyanoacrylate adhesives on jointed 3D printed polymeric materials
由: Yap, Yee Ling, et al.
出版: (2020)

Synthesis Of A Conductive Polymer For Potential Use In Printing Prosthetic Hands Using FDM Technique
由: Zhong, Shaohong, et al.
出版: (2016)

Polycaprolactone-based fused deposition modeled mesh for delivery of antibacterial agents to infected wounds
由: Teo, E.Y., et al.
出版: (2014)

Getting rid of the wires: Curved layer fused deposition modeling in conductive polymer additive manufacturing
由: Diegel, O., et al.
出版: (2014)

A data-driven framework to predict fused filament fabrication part properties using surrogate models and multi-objective optimisation
由: Zhang, Yongjie, et al.
出版: (2022)

Effect of geometry on the mechanical response of additively manufactured polymer
由: Zhang, Yongjie, et al.
出版: (2021)

Processing-microstructure-mechanical properties of an Al-Cu/SiC metal matrix composite synthesized using disintegrated melt deposition technique
由: Gupta, M., et al.
出版: (2014)

Fused deposition modeling of novel scaffold architectures for tissue engineering applications
由: Zein, I., et al.
出版: (2014)

Material extrusion-based printing optimization of recycled HDPE filaments made from used milk jugs
由: Teng, Phillis Soek Po, et al.
出版: (2025)

3D printed photoresponsive devices based on shape memory composites
由: Yang, Hui, et al.
出版: (2020)

Failure Mode Analysis Of Kagome Lattice Structures
由: Rinoj, Gautam, et al.
出版: (2016)

Characterization of mechanical properties of Ultem® 9085 using FDM
由: Zhang, Yongjie, et al.
出版: (2018)

Development of fused deposition modelling for printing of PLA and PEEK
由: Thng, Jeremy Zhen Yu
出版: (2019)

Regarding the processing associated microstructure and mechanical properties improvement of an Al-4.5 Cu alloy
由: Gupta, M., et al.
出版: (2014)

Effect of type of processing on the micro structural features and mechanical properties of Al-Cu/SiC metal matrix composites
由: Gupta, M., et al.
出版: (2014)

Effects of printing parameters on layer adhesion behaviours in fused deposition modelling
由: Sito, Jowyn
出版: (2019)

Evolutionary design of bone scaffolds with reference to material selection
由: Heljak, M.K., et al.
出版: (2014)

A Preliminary Research on Development of a Fibre-Composite, Curved FDM System
由: LIU YUAN
出版: (2010)

Printing and characterisation of Kagome lattice structures by fused deposition modelling
由: Gautam, Rinoj, et al.
出版: (2020)

SYNTHESIS OF NOVEL POLYCYCLIC HYDROCARBONS BASED ON CYCLOPENTA-FUSED PERYLENE
由: ZOU YA
出版: (2021)

A constrained instantaneous learning approach for aerial package delivery robots : onboard implementation and experimental results
由: Mehndiratta, Mohit, et al.
出版: (2020)

The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing
由: Shanmugam, Vigneshwaran, et al.
出版: (2022)

Unmanned aerial vehicle formation implementation
由: Lee, Na Shen.
出版: (2013)

Project solar unmanned aerial vehicle (UAV)
由: Soh, Simon Chi Heng
出版: (2017)

Design of storage box for unmanned aerial vehicle
由: Ang, Jun Ping
出版: (2018)

An experiment study on submersible unmanned aerial vehicle
由: Tan, Wee Kiat
出版: (2018)

Towards aerial robotic workers : design, control and guidance for unmanned aerial manipulators
由: Imanberdiyev, Nursultan
出版: (2020)

Image-based autonomous landing of unmanned aerial vehicles
由: Yong, Jian Wen
出版: (2019)