Multi-trap energy states in GaN HEMTs : characterization and modeling

In this work, presence of multi-trap energy (MTE) levels in the GaN energy bandgap of AlGaN/GaN HEMT is studied based on conductance method as well as temperature-dependent current transient measurements. Using conductance method, it is observed that the MTE model shows a better fit with the measure...

Full description

Saved in:
Bibliographic Details
Main Authors: Binit Syamal, Zhou, Xing, Chiah, Siau Ben
Other Authors: School of Electrical and Electronic Engineering
Format: Conference or Workshop Item
Language:English
Published: 2020
Subjects:
Online Access:https://hdl.handle.net/10356/139024
Tags: Add Tag
No Tags, Be the first to tag this record!
Institution: Nanyang Technological University
Language: English
id sg-ntu-dr.10356-139024
record_format dspace
spelling sg-ntu-dr.10356-1390242020-05-15T01:25:48Z Multi-trap energy states in GaN HEMTs : characterization and modeling Binit Syamal Zhou, Xing Chiah, Siau Ben School of Electrical and Electronic Engineering 2017 IEEE 24th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA) Nanoelectronics Centre Of Excellence Engineering::Electrical and electronic engineering Aluminium Compounds Band Structure In this work, presence of multi-trap energy (MTE) levels in the GaN energy bandgap of AlGaN/GaN HEMT is studied based on conductance method as well as temperature-dependent current transient measurements. Using conductance method, it is observed that the MTE model shows a better fit with the measurement data as compared to the single-trap energy (STE) model. Temperature-dependent current transient analysis under fully ON-state stress conditions has also confirmed the presence of distribution of trap energy states in the GaN energy bandgap. The DC trap model is extended to capture the effect of MTE levels. For STE level, the emission-time constant factor saturates very quickly with increasing drain voltage. However, with MTE levels, the time-constant factor continues to increase and saturates at higher drain bias, exhibiting a similar trend as observed in current transient analysis under ON-state stress measurements. The DC trap model with MTE level fit nicely with the numerical simulation data, thus, justifying the physics-based model. NRF (Natl Research Foundation, S’pore) 2020-05-15T01:25:48Z 2020-05-15T01:25:48Z 2017 Conference Paper Binit Syamal., Zhou, X., & Chiah, S. (2017). Multi-trap energy states in GaN HEMTs : characterization and modeling. Proceedings of the 2017 IEEE 24th International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), 1-5. doi:10.1109/IPFA.2017.8060065 9781538617793 https://hdl.handle.net/10356/139024 10.1109/IPFA.2017.8060065 2-s2.0-85045074698 1 5 en © 2017 IEEE. All rights reserved.
institution Nanyang Technological University
building NTU Library
country Singapore
collection DR-NTU
language English
topic Engineering::Electrical and electronic engineering
Aluminium Compounds
Band Structure
spellingShingle Engineering::Electrical and electronic engineering
Aluminium Compounds
Band Structure
Binit Syamal
Zhou, Xing
Chiah, Siau Ben
Multi-trap energy states in GaN HEMTs : characterization and modeling
description In this work, presence of multi-trap energy (MTE) levels in the GaN energy bandgap of AlGaN/GaN HEMT is studied based on conductance method as well as temperature-dependent current transient measurements. Using conductance method, it is observed that the MTE model shows a better fit with the measurement data as compared to the single-trap energy (STE) model. Temperature-dependent current transient analysis under fully ON-state stress conditions has also confirmed the presence of distribution of trap energy states in the GaN energy bandgap. The DC trap model is extended to capture the effect of MTE levels. For STE level, the emission-time constant factor saturates very quickly with increasing drain voltage. However, with MTE levels, the time-constant factor continues to increase and saturates at higher drain bias, exhibiting a similar trend as observed in current transient analysis under ON-state stress measurements. The DC trap model with MTE level fit nicely with the numerical simulation data, thus, justifying the physics-based model.
author2 School of Electrical and Electronic Engineering
author_facet School of Electrical and Electronic Engineering
Binit Syamal
Zhou, Xing
Chiah, Siau Ben
format Conference or Workshop Item
author Binit Syamal
Zhou, Xing
Chiah, Siau Ben
author_sort Binit Syamal
title Multi-trap energy states in GaN HEMTs : characterization and modeling
title_short Multi-trap energy states in GaN HEMTs : characterization and modeling
title_full Multi-trap energy states in GaN HEMTs : characterization and modeling
title_fullStr Multi-trap energy states in GaN HEMTs : characterization and modeling
title_full_unstemmed Multi-trap energy states in GaN HEMTs : characterization and modeling
title_sort multi-trap energy states in gan hemts : characterization and modeling
publishDate 2020
url https://hdl.handle.net/10356/139024
_version_ 1681059756847923200