Synthesis of compliant parallel mechanisms using an improved beam-based method with the optimization of multiple resonant modes
This paper proposes an improved beam-based method to synthesize a compliant parallel mechanism (CPM) with multiple degrees of freedom (DoFs). The proposed method utilizes a structural optimization technique to synthesize a three-legged CPM with a single-beam structure constructed by two perpendicula...
Saved in:
| Main Authors: | , , |
|---|---|
| Other Authors: | |
| Format: | Article |
| Language: | English |
| Published: |
2023
|
| Subjects: | |
| Online Access: | https://hdl.handle.net/10356/171760 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Nanyang Technological University |
| Language: | English |
| Summary: | This paper proposes an improved beam-based method to synthesize a compliant parallel mechanism (CPM) with multiple degrees of freedom (DoFs). The proposed method utilizes a structural optimization technique to synthesize a three-legged CPM with a single-beam structure constructed by two perpendicular segments in each leg to achieve the desired DoFs and fully decoupled motion. In addition, an objective function is proposed to optimize the primary resonant frequencies in actuating directions to targeted values to achieve the desired dynamic behaviors. A 4-DoF CPM, with one translation and three rotations, is synthesized using the improved beam-based method and all of the primary resonant frequencies are optimized to the targeted values. The 4-DoF CPM prototype is fabricated monolithically and evaluated experimentally in terms of its mechanical characteristics, workspace, and resonant modes. The obtained results show that the experimental stiffness and dynamic properties agree with the predictions. In particular, the prototype has good motion decoupling capability, as reflected by the high stiffness ratios of more than 500 between the non-actuating and actuating directions; the large workspaces of up to 4.0 mm and 7.2° for the translation and rotations, respectively; and the resonant frequencies being close to the targeted ones. In addition, the highest deviations between the predicted and experimental results are 9.49% and 9.13% for the stiffness and dynamic behaviors, respectively, demonstrating the correctness and effectiveness of the proposed method. |
|---|