Moire measurement of IC packages
Flip-chip components have been studied under thermal-cycles. An ultra sensitive displacement measuring technique Moire interferometry was used to investigate this phenomenon. The Moire interferometer was incorporated with a heating chamber whereby the real-time observation of the thermal-cycle proce...
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Theses and Dissertations |
| Published: |
2008
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/10356/5804 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Institution: | Nanyang Technological University |
| Summary: | Flip-chip components have been studied under thermal-cycles. An ultra sensitive displacement measuring technique Moire interferometry was used to investigate this phenomenon. The Moire interferometer was incorporated with a heating chamber whereby the real-time observation of the thermal-cycle process can be done. Flip-chip consists of three layers, the bottom layer is RF-4 substrate, middle and top layers being silicon and molding compound, respectively. Due to the difference in the coefficient of thermal expansion (CTE) of these three layers, the flip-chip will undergo warpage upon thermal cycling. In this experiment, the deformation was recorded using Moire system along the U, V and W fields respectively, and the thermo-mechanical behavior of flip-chip is characterized. The flip-chip structure has the thickness much smaller compared to the in-plane dimensions. This fact is used to build up a flip-chip warpage calculation model. This model assumes the out-of-plane deformation being smaller than the thickness of the flip-chip. It also assumes that the curvature is the same everywhere and the strains are axisymmetric. Out-of-plane deformation formula is derived and is calculated using an Excel spreadsheet. |
|---|